intake....
#1
intake....
so i bought this off a CL member.
do i need one of those MAF adaptor things to hold the filter on? i didnt get one and im assuming thats what i need. you can see it up in the corner. it bolts onto the metal part of the intake that has the sensor?
do i need one of those MAF adaptor things to hold the filter on? i didnt get one and im assuming thats what i need. you can see it up in the corner. it bolts onto the metal part of the intake that has the sensor?
Last edited by nnnickkk; 08-26-05 at 09:59 PM.
#2
Lexus Test Driver
Join Date: Nov 2003
Location: California
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
nick
if you didnt get one with the filter...youll need one =)
you can use any 3" adapter for either our car 92-95, an NA supra 93.5-95, or a mkiii turbo i think it was 86-92. they should all be the same. do NOT buy the ones sold on ebay. mine didnt fit even after them trying to send me 3 or 4 different ones. you might have better luck than i did but i wouldnt want to push it.
-Ronald
if you didnt get one with the filter...youll need one =)
you can use any 3" adapter for either our car 92-95, an NA supra 93.5-95, or a mkiii turbo i think it was 86-92. they should all be the same. do NOT buy the ones sold on ebay. mine didnt fit even after them trying to send me 3 or 4 different ones. you might have better luck than i did but i wouldnt want to push it.
-Ronald
#4
Lexus Test Driver
Join Date: Nov 2003
Location: California
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
did you get it off of ebay? make sure it actually has some sort of filter element and that its not just chrome mesh bent into the shape of a cone filter.
good luck on trying to find the adapter. If you cant find one, try calling k&n or some sort of representative and tell them what you need.
good luck on trying to find the adapter. If you cant find one, try calling k&n or some sort of representative and tell them what you need.
#5
i have the filter. i need a metal piece to bolt onto the part where the sensor is located where the stock box will be taken off. with that piece i can hold the filter on.
kinda like this : http://www.spriso.com/images/Z32%20MAF%20Adapter-2.jpg or http://www.imagestation.com/picture/...d/faa3e349.jpg
but i need one that fits the sc300
kinda like this : http://www.spriso.com/images/Z32%20MAF%20Adapter-2.jpg or http://www.imagestation.com/picture/...d/faa3e349.jpg
but i need one that fits the sc300
#6
Lexus Test Driver
Join Date: Nov 2003
Location: California
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
yeah...they work off of the cars i listed above. they all share the same MAF.
worst case scenario, find a metal machine shop and have one made. bring them the MAF and the filter...then tell them you want a metal plate that matches the MAF...then a 3" pipe welded to it.
it shouldnt cost too much to make
worst case scenario, find a metal machine shop and have one made. bring them the MAF and the filter...then tell them you want a metal plate that matches the MAF...then a 3" pipe welded to it.
it shouldnt cost too much to make
#7
Originally Posted by rscott
yeah...they work off of the cars i listed above. they all share the same MAF.
worst case scenario, find a metal machine shop and have one made. bring them the MAF and the filter...then tell them you want a metal plate that matches the MAF...then a 3" pipe welded to it.
it shouldnt cost too much to make
worst case scenario, find a metal machine shop and have one made. bring them the MAF and the filter...then tell them you want a metal plate that matches the MAF...then a 3" pipe welded to it.
it shouldnt cost too much to make
Trending Topics
#8
Lexus Test Driver
Join Date: Jun 2005
Location: Baton Rouge, Louisiana
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
They have a filter and adapter, for $11 shipped on ebay. I just got one. The adapter is thick aluminum(like 1/8"), not like those at autozone. Ill be posting pics soon.
Jordan
Jordan
Thread
Thread Starter
Forum
Replies
Last Post