When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not really, my car felt just perfect righ from the bat. You might want to check for some loose connections that might have occured during test runs.
you seem to be the only one to think so, I asked a bunch of supra guys that felt the same after a mod.
cant be a loose connection since it only did it the first 2 times
you seem to be the only one to think so, I asked a bunch of supra guys that felt the same after a mod.
cant be a loose connection since it only did it the first 2 times
really???? huh... that is weird. My right when I picked it up my car, it drove like stock but with lots of good high end power. No weird things happened. Describe what happens to yours in detail.
really???? huh... that is weird. My right when I picked it up my car, it drove like stock but with lots of good high end power. No weird things happened. Describe what happens to yours in detail.
Well the 330ohm resistor works !! wired it behind cluster on yellow w/ green striped wire
seems the cluster I borrowed to test was off or broken. the middle is just under half now
i put the 330 ohm resistor on the ecu and it doesnt read right.
maybe you have to put it behind the cluster?
Are you not reading write ? I wrote that I installed it behind cluster meng !
i was reading RIGHT. i saw you said you installed it behing the cluster.
i was wondering why it would be different from the ecu to the cluster.
as i said, i guess you have to install it behind the cluster for it to work.
i was reading RIGHT. i saw you said you installed it behing the cluster.
i was wondering why it would be different from the ecu to the cluster.
as i said, i guess you have to install it behind the cluster for it to work.