313sc3

First off i wold like to say that i am a newbie. But I am not stupid. I checked the search for this first. My question is what is the wiring like for my 92 sc300 to a 93 2jzgtte swap? I will be running a safc for now and next year i will shell out for a haltech e6k.I know few people have done this swap so be nice and let me know what ill be dealing with. Btw my swap is comming with a unhacked engine harness and 78,000 miles on the engine and tranny.

313sc3

Could someone move this to forced induction. Sorry about that.

siaxazn

you should do a search on phils manual. he did a whole write up on how to do this swap with detailed wiring on it. Its a bit pricey but i hear it saves alot of time.

Verge

the swap is fairly involving, i would recommend buying dude's book.. it used to be on ebay, cost like 100 bucks but you will probably need it

313sc3

Thanks everyone.

philauldridge

you can get the detail manual at: www.UltimateLexusTT.com

Hope you were able to get the supra ECU with your swap... Also, you'll need from the Supra:
Intercooler and piping, of course... Supra Power Steering Pump and remote reservoir... igniter and resistor units from Supra

Good luck with your project!