pics of the GTE before it goes in the Soarer!
11-03-03, 02:01 PM
#6
Pole Position
Thread Starter
ready....hope i remember it all........
92" JDM Soarer
2JZ-GTE swap
ITS GT-74 dbb
RPS header
Innovative W/G
Veilside intake manifold
Veilside 100 mm TB
Carrillo rods
JE pistons .020 over
Crower cams.........268 intake/ 278 exhaust
PHR titainium valve train (complete)
UR cam gears
UR pullies
Titan crank dampener
RC 1000 cc injectors
ARP stud kit head/ main
Grex 1.6mm head gasket
New....Toyota bearings (all)
New....Toyota valve shims(pucks)& buckets
New.....Toyota water pump
New.....Toyota oil pump
New.....Toyota cam triggers
New.....Toyota oil pressure switches
New.....Toyota water sensors
........................much much more
First we square decked the block, next we bored it .020 over,then ported and polished the head and did a multi-radius valve job.............balnced the entire rotating assembly and reassembled it using Valco gel-lube..............great stuff
I am sure I missed alot of things, this has been a long drawn out process! Jimmy
2JZ-GTE swap
ITS GT-74 dbb
RPS header
Innovative W/G
Veilside intake manifold
Veilside 100 mm TB
Carrillo rods
JE pistons .020 over
Crower cams.........268 intake/ 278 exhaust
PHR titainium valve train (complete)
UR cam gears
UR pullies
Titan crank dampener
RC 1000 cc injectors
ARP stud kit head/ main
Grex 1.6mm head gasket
New....Toyota bearings (all)
New....Toyota valve shims(pucks)& buckets
New.....Toyota water pump
New.....Toyota oil pump
New.....Toyota cam triggers
New.....Toyota oil pressure switches
New.....Toyota water sensors
........................much much more
First we square decked the block, next we bored it .020 over,then ported and polished the head and did a multi-radius valve job.............balnced the entire rotating assembly and reassembled it using Valco gel-lube..............great stuff
I am sure I missed alot of things, this has been a long drawn out process! Jimmy
11-03-03, 02:03 PM
#7
Pole Position
Thread Starter
Thanks, everyone.....................
Jon,
I am having the billet idler made at a local machine shop! I also Finally got the CF hood I kept asking you about....................long wait!
Jimmy
I am having the billet idler made at a local machine shop! I also Finally got the CF hood I kept asking you about....................long wait!
Jimmy
Last edited by JDMJim; 11-03-03 at 02:05 PM.
Trending Topics
11-03-03, 02:26 PM
#8
Lexus Champion
Much respect Jimmy, that setup is off the hook, let me know if you can have another idler made. As for the hood, the one I wanted to get you and I was the Glass Ray, and apparently the fitment isn't A+ so I lost interest in it. Let's see some more pics bro...
11-03-03, 02:58 PM
#10
Pole Position
Thread Starter
more pics coming ....................
i'll get some more pics when i spend some more money........LOL The car is at the paint shop now, getting the engine bay shot. Let me get this first pully made and then mabey we can get a GB for CL and SF going!
Jimmy
MrJohnTan,
don't be jealous............just out do me! I took all the pics of SC and Supra owners cars, took the best idea's out there(my opinion) and added some of my own. Hopefully this will result in SHOW and...GO!
Jimmy
Jimmy
MrJohnTan,
don't be jealous............just out do me! I took all the pics of SC and Supra owners cars, took the best idea's out there(my opinion) and added some of my own. Hopefully this will result in SHOW and...GO!
Jimmy
Last edited by JDMJim; 11-03-03 at 02:59 PM.
