The Unofficial Aftermarket Wheel Thread
#121
Driver School Candidate
Join Date: Nov 2015
Location: Tokyo
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
When you say it stops flashing, does it flash every time you drive the car then turn solid after a few mins? I reckon I could deal with solid, but the flashing would annoy me
#122
Kiwijapan and others
I just spoke to wheel tec, where I purchased my aftermarket wheels and tires. They said that they reinstalled my OEM sensors on the new wheels and that they have a re-set tool that has to set the sensors to the cars computer. If the shop that installed your new wheels don't have the tool, they will not work.
I am sure that the dealer can reset the sensors for you. Ask them to do it. If you had a bad wheel and they had to replace the wheel and put on the original or new sensor, doesn't it just make sense that they have to have the tool to make it work properly.
I hope this helps you all. Don't take no for an answer from your dealer.
I am sure that the dealer can reset the sensors for you. Ask them to do it. If you had a bad wheel and they had to replace the wheel and put on the original or new sensor, doesn't it just make sense that they have to have the tool to make it work properly.
I hope this helps you all. Don't take no for an answer from your dealer.
#124
The pursuit of F
#128
My Rays Gram Lights 57FXX came in a few weeks ago but I was too busy to pick them up. Will pair them up with Continental DWS 06 in the spring. I got a pretty good price considering the US to CAD exchange rate :/....
Wheel specs: 20x9 +38 Face 1 (Didn't want to go too aggressive as this is my parent's car)
Got them glass coated to resist road filth and the minimal brake dust.
Thanks to Sam @ Nextmod for the hookup.
Wheel specs: 20x9 +38 Face 1 (Didn't want to go too aggressive as this is my parent's car)
Got them glass coated to resist road filth and the minimal brake dust.
Thanks to Sam @ Nextmod for the hookup.
#130
Thanks corrado! They're surprisingly light for being flow formed and not forged. I'd say around 25 lbs. max per rim.
#131
My Rays Gram Lights 57FXX came in a few weeks ago but I was too busy to pick them up. Will pair them up with Continental DWS 06 in the spring. I got a pretty good price considering the US to CAD exchange rate :/....
Wheel specs: 20x9 +38 Face 1 (Didn't want to go too aggressive as this is my parent's car)
Got them glass coated to resist road filth and the minimal brake dust.
Thanks to Sam @ Nextmod for the hookup.
Wheel specs: 20x9 +38 Face 1 (Didn't want to go too aggressive as this is my parent's car)
Got them glass coated to resist road filth and the minimal brake dust.
Thanks to Sam @ Nextmod for the hookup.
I found a wheel that look identical almost. So the Grams caught my eye. The ones I looked at don't have the offsets we need. (XO Verona) So the Grams might do it.
#134
IIRC , on that wheel it was the lug pattern not the offset , my bad. 5 x114.3 wasn't available. I'm not sure how updated the site is if you find them in proper fitment lmk.
The following users liked this post:
22NX350F (01-27-22)
#135
"Hello. Yes, we can have these wheels custom drilled for your vehicle. The wheels will be 20x9 front and rear.
They are only available in matte gunmetal and silver. The black finish is currently out of stock.
Regards"