Current and Future NX owners - modifications
#1
Driver School Candidate
Thread Starter
Join Date: Oct 2010
Location: Goleta/Santa Barbara & The Valley
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Current and Future NX owners - modifications
Anyone planning on adding any modifications once they get their hands on an NX? If so what? I'd love to throw some springs on mine, i think a nice subtle drop would do wonders on the stance of the NX.
#2
The pursuit of F
Not sure yet if I'll get the RSR springs, coilovers, or none at all, but I do have some minor mods in the works ...build thread soon...
Last edited by corradoMR2; 12-12-14 at 08:07 PM.
#3
Driver School Candidate
Thread Starter
Join Date: Oct 2010
Location: Goleta/Santa Barbara & The Valley
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I've seen those RS-R springs and drop is nice! Springs and for sure window tint are my first couple. But yes keep us updated corrado would love to see what you do and what others do.
#7
Driver School Candidate
Join Date: Jan 2015
Location: LA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Lexus Test Driver
Honest question....WHY...would one lower a SUV?
The purpose is ride height and utility. You're now removing the ride height portion for "stance". When I think of stance, I think of a performance car or muscle car sitting on 12.5" rear drag radials in which when you look under all you see is rubber.
Shrug
MR2 did it great with the new wheels he put on. That is how you create a look. A slightly taller diameter with a slightly wider piece of rubber. Making an SUV sit lower, just looks....ugh.
This is Stance:
This is not:
The purpose is ride height and utility. You're now removing the ride height portion for "stance". When I think of stance, I think of a performance car or muscle car sitting on 12.5" rear drag radials in which when you look under all you see is rubber.
Shrug
MR2 did it great with the new wheels he put on. That is how you create a look. A slightly taller diameter with a slightly wider piece of rubber. Making an SUV sit lower, just looks....ugh.
This is Stance:
This is not:
Last edited by Swacer; 01-30-15 at 04:37 AM.
#10
Lexus Test Driver
#11
Driver School Candidate
Join Date: Jan 2015
Location: LA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
glovebox table.
After a road trip to NC from GA in a mini-van. Much of which I was on the computer... I decided I amy try to build a custom laptop table that pulls out of the glove box. It would be stored away when blox was closed and you would have the choice to pull it out when glove box was open.
I may try to make a peltier cooler to hold a few drinks for road trips as well. (have not decided where to locate the cooler yet).
I may try to make a peltier cooler to hold a few drinks for road trips as well. (have not decided where to locate the cooler yet).
#13
first "mods" planned upon delivery:
- gloss black vinyl wrap on roof.
- 32% tint side/rear windows, 50% windshield.
- paint protection film on full hood and front bumper.
- LED bulb conversion for interior lighting.
Future mods:
- new rims/tires
- slight drop (just enough to reduce fender/wheel gap)
- gloss black vinyl wrap on roof.
- 32% tint side/rear windows, 50% windshield.
- paint protection film on full hood and front bumper.
- LED bulb conversion for interior lighting.
Future mods:
- new rims/tires
- slight drop (just enough to reduce fender/wheel gap)
#14
Driver School Candidate
Thread Starter
Join Date: Oct 2010
Location: Goleta/Santa Barbara & The Valley
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Honest question....WHY...would one lower a SUV?
The purpose is ride height and utility. You're now removing the ride height portion for "stance". When I think of stance, I think of a performance car or muscle car sitting on 12.5" rear drag radials in which when you look under all you see is rubber.
Shrug
MR2 did it great with the new wheels he put on. That is how you create a look. A slightly taller diameter with a slightly wider piece of rubber. Making an SUV sit lower, just looks....ugh.
This is Stance:
This is not:
The purpose is ride height and utility. You're now removing the ride height portion for "stance". When I think of stance, I think of a performance car or muscle car sitting on 12.5" rear drag radials in which when you look under all you see is rubber.
Shrug
MR2 did it great with the new wheels he put on. That is how you create a look. A slightly taller diameter with a slightly wider piece of rubber. Making an SUV sit lower, just looks....ugh.
This is Stance:
This is not:
#15
The pursuit of F
After a road trip to NC from GA in a mini-van. Much of which I was on the computer... I decided I amy try to build a custom laptop table that pulls out of the glove box. It would be stored away when blox was closed and you would have the choice to pull it out when glove box was open.
I may try to make a peltier cooler to hold a few drinks for road trips as well. (have not decided where to locate the cooler yet).
I may try to make a peltier cooler to hold a few drinks for road trips as well. (have not decided where to locate the cooler yet).
Thread
Thread Starter
Forum
Replies
Last Post
EdwardK
Suspension and Brakes
5
03-31-11 09:11 AM
efini_kid
ES - 1st to 4th Gen (1990-2006)
21
10-04-05 03:00 PM