Matching MTX AMPS..Cheap!!..MXA Series!!
#1
Lexus Test Driver
Thread Starter
Matching MTX AMPS..Cheap!!..MXA Series!!
I bought a pair of MTX AMPs for my ride a while back and NEVER INSTALLED THEM...they are refurbed but look BRAND NEW..I've never even put power in them..
They are the MXA Series..
MXA8001
and
MXA6004
They are a MATCHING SET (size and look)..
Very powerfull amps and lots of features..
These were OVER $300.00 PER AMP at Circuit City...
I'll sell them BOTH SHIPPED for $375.00 ... I have all the boxes and manuals..
There is NO warranty as I've had them in my garage for almost 1 year and just sitting there.
Lemme know..
Mike
They are the MXA Series..
MXA8001
Specifications
Power Output:
400 Watts RMS x 1 channel at 4 Ohms ≤ 1% THD+N
Signal-to-Noise Ratio:
75 dBA (reference: 1 W output)
Additional Power Output:
800 Watts RMS x 1 channel at 2 Ohms ≤ 1% THD+N
THD+N (Distortion):
<0.25% (reference: 1 W output)
Frequency Response:
20 Hz to 200 Hz (-3dB)
Maximum Input Signal:
5V
Maximum Sensitivity:
100mV
Dimensions:
17.57 x 9.72 x 2.5 (446mm x 247mm x 63.5mm)
Power Output:
400 Watts RMS x 1 channel at 4 Ohms ≤ 1% THD+N
Signal-to-Noise Ratio:
75 dBA (reference: 1 W output)
Additional Power Output:
800 Watts RMS x 1 channel at 2 Ohms ≤ 1% THD+N
THD+N (Distortion):
<0.25% (reference: 1 W output)
Frequency Response:
20 Hz to 200 Hz (-3dB)
Maximum Input Signal:
5V
Maximum Sensitivity:
100mV
Dimensions:
17.57 x 9.72 x 2.5 (446mm x 247mm x 63.5mm)
and
MXA6004
Specifications
Power Output:
75 Watts RMS x 4 channels at 4 Ohms ≤ 1% THD+N
Signal-to-Noise Ratio:
80 dBA (reference: 1 W output)
Additional Power Output:
150 Watts RMS x 4 channels at 2 Ohms ≤ 1% THD+N
300 Watts RMS x 2 channels bridged at 4 Ohms ≤ 1% THD+N
THD+N (Distortion):
<0.25% (reference: 1 W output)
Frequency Response:
20 Hz to 20 kHz (-3dB)
Maximum Input Signal:
5V
Maximum Sensitivity:
100mV
Dimensions:
17.57 x 9.72 x 2.5 (446mm x 247mm x 63.5mm)
Power Output:
75 Watts RMS x 4 channels at 4 Ohms ≤ 1% THD+N
Signal-to-Noise Ratio:
80 dBA (reference: 1 W output)
Additional Power Output:
150 Watts RMS x 4 channels at 2 Ohms ≤ 1% THD+N
300 Watts RMS x 2 channels bridged at 4 Ohms ≤ 1% THD+N
THD+N (Distortion):
<0.25% (reference: 1 W output)
Frequency Response:
20 Hz to 20 kHz (-3dB)
Maximum Input Signal:
5V
Maximum Sensitivity:
100mV
Dimensions:
17.57 x 9.72 x 2.5 (446mm x 247mm x 63.5mm)
They are a MATCHING SET (size and look)..
Very powerfull amps and lots of features..
These were OVER $300.00 PER AMP at Circuit City...
I'll sell them BOTH SHIPPED for $375.00 ... I have all the boxes and manuals..
There is NO warranty as I've had them in my garage for almost 1 year and just sitting there.
Lemme know..
Mike
Thread
Thread Starter
Forum
Replies
Last Post