ANy one have any MTX amps for sale?
10-20-05, 04:43 PM
#4
MTX Amps
I bought a pair of MTX AMPs for my ride a while back and NEVER INSTALLED THEM...they are refurbed but look BRAND NEW..I've never even put power in them..
They are the MXA Series..
MXA8001
and
MXA6004
They are a MATCHING SET (size and look)..
Very powerfull amps and lots of features..
These were OVER $300.00 PER AMP at Circuit City...
I'll sell them BOTH SHIPPED for $375.00 ... I have all the boxes and manuals..
There is NO warranty as I've had them in my garage for almost 1 year and just sitting there.
Lemme know..
Mike
They are the MXA Series..
MXA8001
Specifications
Power Output:
400 Watts RMS x 1 channel at 4 Ohms ≤ 1% THD+N
Signal-to-Noise Ratio:
75 dBA (reference: 1 W output)
Additional Power Output:
800 Watts RMS x 1 channel at 2 Ohms ≤ 1% THD+N
THD+N (Distortion):
<0.25% (reference: 1 W output)
Frequency Response:
20 Hz to 200 Hz (-3dB)
Maximum Input Signal:
5V
Maximum Sensitivity:
100mV
Dimensions:
17.57 x 9.72 x 2.5 (446mm x 247mm x 63.5mm)
Power Output:
400 Watts RMS x 1 channel at 4 Ohms ≤ 1% THD+N
Signal-to-Noise Ratio:
75 dBA (reference: 1 W output)
Additional Power Output:
800 Watts RMS x 1 channel at 2 Ohms ≤ 1% THD+N
THD+N (Distortion):
<0.25% (reference: 1 W output)
Frequency Response:
20 Hz to 200 Hz (-3dB)
Maximum Input Signal:
5V
Maximum Sensitivity:
100mV
Dimensions:
17.57 x 9.72 x 2.5 (446mm x 247mm x 63.5mm)
and
MXA6004
Specifications
Power Output:
75 Watts RMS x 4 channels at 4 Ohms ≤ 1% THD+N
Signal-to-Noise Ratio:
80 dBA (reference: 1 W output)
Additional Power Output:
150 Watts RMS x 4 channels at 2 Ohms ≤ 1% THD+N
300 Watts RMS x 2 channels bridged at 4 Ohms ≤ 1% THD+N
THD+N (Distortion):
<0.25% (reference: 1 W output)
Frequency Response:
20 Hz to 20 kHz (-3dB)
Maximum Input Signal:
5V
Maximum Sensitivity:
100mV
Dimensions:
17.57 x 9.72 x 2.5 (446mm x 247mm x 63.5mm)
Power Output:
75 Watts RMS x 4 channels at 4 Ohms ≤ 1% THD+N
Signal-to-Noise Ratio:
80 dBA (reference: 1 W output)
Additional Power Output:
150 Watts RMS x 4 channels at 2 Ohms ≤ 1% THD+N
300 Watts RMS x 2 channels bridged at 4 Ohms ≤ 1% THD+N
THD+N (Distortion):
<0.25% (reference: 1 W output)
Frequency Response:
20 Hz to 20 kHz (-3dB)
Maximum Input Signal:
5V
Maximum Sensitivity:
100mV
Dimensions:
17.57 x 9.72 x 2.5 (446mm x 247mm x 63.5mm)
They are a MATCHING SET (size and look)..
Very powerfull amps and lots of features..
These were OVER $300.00 PER AMP at Circuit City...
I'll sell them BOTH SHIPPED for $375.00 ... I have all the boxes and manuals..
There is NO warranty as I've had them in my garage for almost 1 year and just sitting there.
Lemme know..
Mike
Last edited by 1SILVERGS3; 10-20-05 at 04:46 PM.
10-20-05, 05:50 PM
#6
O.C. Lucky Strike Fanatic
Thread Starter
iTrader: (1)
Join Date: Dec 2002
Location: So.Cal.
Posts: 8,675
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Lexus GS3
Bryan my 1 channel mono amp is 456 RMS watts.. let me know if ur interested.. Basically new.. used it for only 1 1/2 days.
Tommy
Tommy
Trending Topics
10-20-05, 07:48 PM
#8
Originally Posted by Neo
Well, depending on the price, a little headroom never hurts. 
MIke
10-22-05, 05:42 PM
#9
Driver
Join Date: Sep 2004
Location: Texas
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
There is a guy on www.caraudio.com that is selling a MTX 5400x 5channel amp for $130 shipped.
click here for the thread
click here for the thread
Thread
Thread Starter
Forum
Replies
Last Post