dxav

Sorry if this post is not where it belongs. I am looking for some interest in a custom fiberglass enclosure we built that the customer is not happy with. Over 80 hours went into the design and fabrication. About 8 gallons of resin, 5 lbs of expander and too many square feet of 1 1/2 ounce chopped strand mat were used. It is 2 separate boxes, fitted together angled down and in. They are both bandpass, each with a 14" straight port firing up thru the top of the boxes. They are designed to fit 10" subs, angled into eachother. The boxes have initial sanding complete, but need bondo and more sanding. If anyone is interested in pics, or more about the system, please let us know. We will ship anywhere in the US. Also, if someone knows a better spot to post, please direct me.

Thanks!
Jeremy
dxaudiovideo@hotmail.com

AA Concepts

You should post in the marketplace but you will want to get pics for sure!

Why dosen't he want it?

dxav

Hey, thanks for the info. I am new, and didn't see that far down on the page. He loves the setup, and knows we put a lot of work into it. The setup was for JL 10W3s, and they are really not designed for a full fiberglass enclosure. Bass hits really hard, but not as good as a wood enclosure.

DXAV

rominl

iTrader: (4)

also please post a price per forum rules

dxav

I would have posted a price, but I don't really know what it is worth. Anyway we look at it we will take a loss on the project. But we still want to give someone the opportunity to finish off an almost completed enclosure.

DXAV

onesicgs

also let us know what car its for..

Letsride

Still no price posted....

dxav

Sorry about not pricing out the enclosure. I didn't have time this weekend to get the pics up to the thread.

The vehicle is a 2001 Lexus IS300.

I will post pics tonight, and say $250 plus (UPS Ground) shipping for 150lbs split into 2 separate packages. If you think it is too high, let me know why, and we work the price. Shipping will be quoted from USP directly.

Here is my original post:

I am looking for some interest in [selling] a custom fiberglass enclosure we built that the customer is not happy with. Over 80 hours went into the design and fabrication. About 8 gallons of resin, 5 lbs of expander and too many square feet of 1 1/2 ounce chopped strand mat were used. It is 2 separate boxes, fitted together angled down and in[to the spare tire well]. They are both bandpass, each with a 14" straight port firing up thru the top of the boxes. They are designed to fit 10" subs, angled into eachother. The boxes have initial sanding complete, but need bondo and more sanding. If anyone is interested in pics, or more about the system, please let us know. We will ship anywhere in the US. Also, if someone knows a better spot to post, please direct me.

Thanks!
Jeremy
dxaudiovideo@hotmail.com

dxav

Thanks for your patience. Here are a couple of pics we have. They still need a few hours, but it is up for grabs, and most of the grunt work is done!





Thanks for looking. Let me know. We can do a little fiberglass modifying if you are interested!

DXAV