lx570 Front Brakes rotors pad same as lx470??
#1
Pole Position
Thread Starter
lx570 Front Brakes rotors pad same as lx470??
I used to own a lx470 2006 traded it for a 08 lx570, i was thinking of changing out the brakes /rotors for the front since i am getting little pulse on higher speed braking its at 55k miles and i think everything is original ...keeping the story short i was on sewell parts and was in process of ordering the lx570 rotors/pads i just wanted to check if the older lx470 and new lx570 ones are any different since i had brand new brembo rotors and oem toyota pads for the lx470 which i never got around installing..
So the parts(rotors/pads) are exactly the same for both lx570 and lx470 on sewell and i was kind of surprised that there is absolutely no difference since the LX570 i thought weighted more??
So it is safe to assume my brembo rotors and pads which i bought for the lx470 should no doubt fit the Lx570?? i was going to do this myself just wanted your thoughts before i open everything up.
would like to thank in advance for the inputs i get
So the parts(rotors/pads) are exactly the same for both lx570 and lx470 on sewell and i was kind of surprised that there is absolutely no difference since the LX570 i thought weighted more??
So it is safe to assume my brembo rotors and pads which i bought for the lx470 should no doubt fit the Lx570?? i was going to do this myself just wanted your thoughts before i open everything up.
would like to thank in advance for the inputs i get
#2
Pole Position
Thread Starter
i spoke to soon, seems they are different..i was looking at the internal product number, not the actual part number.
#3
Pole Position
Pulsing is likely due to warped rotors and you really need to have them turned when doing your brakes.
#4
Pole Position
Thread Starter
Yes that is true, but the amount i am going to pay to have this done- i will add some more $$ and get some nicer rotors pads/ i am thinking ebc or stoptech have not made up my mind yet.
The stock LX570 brakes are not as good as i remember were on the lx470, i guess the lx470 used to stop on a dime- this one goes a bit further or i have to just slam to stop right away
The stock LX570 brakes are not as good as i remember were on the lx470, i guess the lx470 used to stop on a dime- this one goes a bit further or i have to just slam to stop right away
#5
Pole Position
Yes that is true, but the amount i am going to pay to have this done- i will add some more $$ and get some nicer rotors pads/ i am thinking ebc or stoptech have not made up my mind yet.
The stock LX570 brakes are not as good as i remember were on the lx470, i guess the lx470 used to stop on a dime- this one goes a bit further or i have to just slam to stop right away
The stock LX570 brakes are not as good as i remember were on the lx470, i guess the lx470 used to stop on a dime- this one goes a bit further or i have to just slam to stop right away
#6
Pole Position
Thread Starter
Dude...3 lx570 already..? About 1for every year. . if i do that i will hear it everyday by my wife..but i just ordred stock pads..cant make up my mind between after market or stock rotors.
all years of LX(450/470/570) stop ok..but mine lx570 I feel I have to push the pedal more to make it stop. maybe its less sensitive ..
all years of LX(450/470/570) stop ok..but mine lx570 I feel I have to push the pedal more to make it stop. maybe its less sensitive ..
Last edited by UZ214; 03-12-13 at 05:09 AM.
Thread
Thread Starter
Forum
Replies
Last Post
travelride
Suspension and Brakes
4
11-18-17 09:54 PM