2013 Spindle grill possible on our 2008-2012 !!!
#16
#17
Driver
Thread Starter
Join Date: Jan 2010
Location: ny
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
It is possible . At Sewell Lexus parts , you can order all the bumpers , front and rear an even the moldings .
Then for the lights , go under 2013 lx and the led housings for the front lights can also be ordered.
Another words , every exterior feature can be bought and installed .
The only thing holding me back is the price . It will cost many thousands of dollars.
I also have a 2011 with 5 k miles . The price discourages me to proceed with the transformation.
Maybe I too will wait for 2014. Maybe not .
Then for the lights , go under 2013 lx and the led housings for the front lights can also be ordered.
Another words , every exterior feature can be bought and installed .
The only thing holding me back is the price . It will cost many thousands of dollars.
I also have a 2011 with 5 k miles . The price discourages me to proceed with the transformation.
Maybe I too will wait for 2014. Maybe not .
#19
Parts Vendor
iTrader: (9)
The front bumper spindle upgrade does fit as it should without the LED headlamps being installed. While the headlamps will physically fit, its the various wire harnesses that is the challenge. We've attempted the installation ourselves however faced a fair amount of difficulty with the wiring and the proper connects. If could work with some custom wiring connects but to make this a plug and play option is the challenge.
At present we have placed this modification on hold.
Darrel
At present we have placed this modification on hold.
Darrel
#22
Driver School Candidate
Join Date: Nov 2006
Location: n/a
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
#23
Driver School Candidate
Join Date: Jul 2012
Location: Vancouver
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
The front bumper spindle upgrade does fit as it should without the LED headlamps being installed. While the headlamps will physically fit, its the various wire harnesses that is the challenge. We've attempted the installation ourselves however faced a fair amount of difficulty with the wiring and the proper connects. If could work with some custom wiring connects but to make this a plug and play option is the challenge.
At present we have placed this modification on hold.
Darrel
At present we have placed this modification on hold.
Darrel