IL 98 ls400 parts. LOOK!!! cheap - Page 2

5sp_jzz30 · 10-21-09, 07:31 PM

ADDING MORE THINGS!!!

ITEM: 98 ls400 tan and gray center console arm rests
PRICE: 35 each
SHIPPING: yes
DESCRIPTION: both in good shape. both have small creases in the top from stuff laying on top of it. i think if you take a heat gun or a hair dryer, warm it up, and massage it will go back to normal. decent shape. other than that.
*PIC:

ITEM: 98 ls400 left rear gray door panel
PRICE: 50
SHIPPING: yes
DESCRIPTION: good condition overall. has 2 small imperfections. they are not cut or hole. they are creases in the leather. i think with a heat gun with some rubbing it will go back to normal
*PIC:

ITEM: 98 ls400 right rear tan door panel
PRICE: 35
SHIPPING: yes
DESCRIPTION: good condition other then the crease in the bottom of the panel. i dont think it will come out easily but its worth a try. if you have a trashed panel this looks good either way. with the door closed you will never see that crease.
*PIC:

some dirt on the panel. i tried just wiping it and it was coming right off. some leather cleaner will do the trick.

crease at the bottom of the panel

ITEM: 98 ls400 rear window control switches with ashtrays and lids.
PRICE: 50
SHIPPING: yes
DESCRIPTION: wood grain. really nice condition. ashtrays are clean and empty. came out of a non smoker car.
*PIC:

ITEM: 98 ls400 tan and gray center consoles
PRICE: 40 each
SHIPPING: yes
DESCRIPTION: gray and tan center console. can sell together with the armrest. pretty good condition.
*PIC:

skperformance · 10-21-09, 11:15 PM

Let me know about shipping for the above i asked about.
For the dome light it needs power only which should be provided by the harness already there . No big deal if it does not as it is only tapping 2 wires since it is always on.
Only issue with fitting a 98-00 one into a 95-97 is the home link button area itself . You might have to make a small cut out section to your head liner since the one you have is flat with no curve where the buttons are . The 98 curves up where it meet the sunroof for placement of the buttons.

Benji · 10-21-09, 11:22 PM

Quote:

Originally Posted by skperformance

Let me know about shipping for the above i asked about.
For the dome light it needs power only which should be provided by the harness already there . No big deal if it does not as it is only tapping 2 wires since it is always on.
Only issue with fitting a 98-00 one into a 95-97 is the home link button area itself . You might have to make a small cut out section to your head liner since the one you have is flat with no curve where the buttons are . The 98 curves up where it meet the sunroof for placement of the buttons.

Good to know. Thanks guys for the help. I couldn't find any compatibility info after searching, only found programming issues people had. I'll hold off on getting, but now I know as I was always curious if it would be plug and play.