E-cutout on my LS430
#2
Driver School Candidate
Join Date: Aug 2008
Location: nj
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Hello friends,
I don't remember showing you guys the results of my QTP wireless remote e-cutouts.
Here is a clip:
LS430 with QTP e-cutouts - deleted resonator - YouTube
Tell me what ya think!
I don't remember showing you guys the results of my QTP wireless remote e-cutouts.
Here is a clip:
LS430 with QTP e-cutouts - deleted resonator - YouTube
Tell me what ya think!
#6
Thanks, I personally didn't expect it to sound this good.
Both angles were with the cutout OPEN. I didn't record it while it was closed, it's just stock silent + sound of the removed resonators, so thats why.
I placed it a little bit before the stock mufflers, right after the straight pipe(where there used to be the resonators).
I placed it a little bit before the stock mufflers, right after the straight pipe(where there used to be the resonators).
Trending Topics
#9
I'm thinking to put this kit on mine : QTP QTEC50CPSK2 Dual 2 5" Electric Exhaust Valves SS Cutouts Turn Downs Remotes | eBay
Denis.
Denis.
QTP is a very good company. I really like how good the quality of their products are.
This kit is a normal e-cutout. You should better get the "Low Profile" ones, our cars are really close to the floor, and this cutout here might give you problems.
But the "Low Profile" type, would have a much snuggled fit. And BTW, there is no place for the turn downs. It's just too crowded before the mufflers.
#11
Lead Lap
iTrader: (4)
Join Date: May 2006
Location: FRANCE
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
QTP is a very good company. I really like how good the quality of their products are.
This kit is a normal e-cutout. You should better get the "Low Profile" ones, our cars are really close to the floor, and this cutout here might give you problems.
But the "Low Profile" type, would have a much snuggled fit. And BTW, there is no place for the turn downs. It's just too crowded before the mufflers.
This kit is a normal e-cutout. You should better get the "Low Profile" ones, our cars are really close to the floor, and this cutout here might give you problems.
But the "Low Profile" type, would have a much snuggled fit. And BTW, there is no place for the turn downs. It's just too crowded before the mufflers.
Do you have a link? OK I found this on their website : QTEC66 http://www.quicktimeperformance.com/OVAL/
Denis.
Last edited by denIS200; 05-27-14 at 06:30 AM.
#13
OK thanks for the information.
Do you have a link? OK I found this on their website : QTEC66 http://www.quicktimeperformance.com/OVAL/
Denis.
Do you have a link? OK I found this on their website : QTEC66 http://www.quicktimeperformance.com/OVAL/
Denis.
You'll find a whole kit with the wireless remote system. And you'll find a DIY I did a while back here in the forums on how to install.
I think I lost TORQUE, but totally gained some HORSEPOWER.
From zero the car is a bit sluggish than if the cutout was closed, but just a little.
But, when it's open, the 80mph ---> 120mph seems to be faster than if the cutout was closed.
Noting that I also have an Injen cold air intake.