Aftermarket air suspension installed
#1
Pit Crew
Thread Starter
Aftermarket air suspension installed
Just thought I'd share some pics of my air setup I installed over the weekend.
Air management: Ridetech
Air struts: Airtekk (double bellow front and rear). Made specific for UCF30. NOT a generic bag on coilover setup.
1/4" DOT Type A soft lines. Electronic management. 8-valve, FBSS setup.
Air management: Ridetech
Air struts: Airtekk (double bellow front and rear). Made specific for UCF30. NOT a generic bag on coilover setup.
1/4" DOT Type A soft lines. Electronic management. 8-valve, FBSS setup.
Last edited by eggtart; 07-02-13 at 08:53 PM.
#5
Pit Crew
Thread Starter
picture is parked height. Im going to go lower in the back, just need to adjust the LCA for more camber first. Right now my wheel would hit the quarter panel if I went lower. I can post pics of ride height and max lift if anyone is really interested.
#7
Pit Crew
Thread Starter
Specs at ride height:
FRONT: 90 PSI, shocks set to 10 clicks (out of max stiffness at 36)
REAR: 75 PSI, shocks set to 7 clicks (out of max stiffness at 36)
I like it nice and smooth, rides just slightly stiffer than stock! no bounciness at all
FRONT: 90 PSI, shocks set to 10 clicks (out of max stiffness at 36)
REAR: 75 PSI, shocks set to 7 clicks (out of max stiffness at 36)
I like it nice and smooth, rides just slightly stiffer than stock! no bounciness at all
Trending Topics
#8
Pit Crew
Thread Starter
I can also control the air from outside the car thru my phone. Connects to the air management computer via bluetooth. Here is a pic of what the display looks like on the phone in landscape and portrait modes