Offset help
Thread Starter
Driver School Candidate
Joined: Apr 2013
Posts: 30
Likes: 0
From: NJ
Offset help
Hey guys looking at a set of rims Work D3S Varianza.Only moving up to 18s.Dont think the 18s will change the ride too much???Was wondering what the offset would be front and rear to clear the brakes etc???Any thoughts on tires??Don't want them too low. Any help would be appreciated.Its an LS430 03 THX
http://www.workwheelsusa.com/media/w...colors/175.jpg
http://www.workwheelsusa.com/media/w...colors/175.jpg
Last edited by CJF1; Jun 19, 2013 at 03:19 PM.
With Work Wheels you can order the front wheels as R-Disk which should clear the brakes and Low-Disk should work fine for the rear. As far as tires go, get 30, 35, or 40 profile tires. I was lowered on the stock 18"s with high profile tires and the massive tires almost destroyed my fenders.
I also have Works on my LS right now. I would recommend going 18x9 +25 with a 235/35/18 tire up front and 18x10 +20 with 265/35/18 tire for the rear. With a setup like that you shouldn't have any trouble with the fenders if you're not going to slam the car.
I also have Works on my LS right now. I would recommend going 18x9 +25 with a 235/35/18 tire up front and 18x10 +20 with 265/35/18 tire for the rear. With a setup like that you shouldn't have any trouble with the fenders if you're not going to slam the car.
Thread
Thread Starter
Forum
Replies
Last Post
dexterco
IS - 3rd Gen (2014-present)
14
Jul 3, 2014 12:31 PM
