LS - 3rd Gen (2001-2006) Discussion topics related to the flagship Lexus LS430

Center consule will not open 2003

Thread Tools
 
Search this Thread
 
Old 09-18-12, 05:48 PM
  #1  
wmbinford
Driver School Candidate
Thread Starter
 
wmbinford's Avatar
 
Join Date: Mar 2010
Location: Texas
Posts: 41
Likes: 0
Received 3 Likes on 1 Post
Default Center consule will not open 2003

I read sigers98 post on 2/9/08. But I wonder if it is necessary to take the center console out to get it open? The opening handle just seems not to release the latch. I was hoping I could trick it open and find a way to see if the linkage to the latch itself could be repaired or jury rigged. Help appreciated - new Lexus LS430 owner.
Old 09-18-12, 10:59 PM
  #2  
VIPDrizzy
Driver
 
VIPDrizzy's Avatar
 
Join Date: Jan 2012
Location: TX
Posts: 136
Likes: 0
Received 0 Likes on 0 Posts
Default

Not unless you have something strong enough thin enough and flexible enough to try and slip in it.
Old 09-19-12, 04:02 AM
  #3  
jimbosr1
Racer
 
jimbosr1's Avatar
 
Join Date: Sep 2010
Location: GA
Posts: 1,977
Received 146 Likes on 115 Posts
Default

have you tried to push on the back side of the lid toward the front of the car and lift the handle?
Old 09-20-12, 04:20 PM
  #4  
Chemtj
Driver School Candidate
 
Chemtj's Avatar
 
Join Date: Mar 2012
Location: Georgia
Posts: 36
Likes: 0
Received 2 Likes on 1 Post
Default

As jimbosr1 said push from the rear as you are lifting the handle. Once open look at the center console lid fix thread. The screws that hold the lid to the hinges are loose or have fallen out. Just finished fixing mine literally 10 minutes ago, for the second time. Do not use locktite! I used some small star lock washers the second time.
Old 09-20-12, 04:32 PM
  #5  
john339
Driver
 
john339's Avatar
 
Join Date: Jun 2012
Location: CA
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Default

a little rubber cement on the screws before re-installing them will hold them from vibrations. Rubber cement will not harm the plastic.
Old 09-22-12, 01:36 AM
  #6  
wmbinford
Driver School Candidate
Thread Starter
 
wmbinford's Avatar
 
Join Date: Mar 2010
Location: Texas
Posts: 41
Likes: 0
Received 3 Likes on 1 Post
Default pushing from the back did it!

Thanks though I feel rather stupid right now.
Old 10-09-12, 08:06 PM
  #7  
wmbinford
Driver School Candidate
Thread Starter
 
wmbinford's Avatar
 
Join Date: Mar 2010
Location: Texas
Posts: 41
Likes: 0
Received 3 Likes on 1 Post
Default

I removed the console, which was easy, and sure enough the two screws were missing. I replaced them which was a little difficult because my screw driver was not magnetized and I can be a klutz. I replaced the console, which was easy and the thing works as advertized. Less than 45 minutes including a beer (which may have had something to do with the putting in new screws!) Thank you!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HealP
RX - 3rd Gen (2010-2015)
11
02-26-18 06:12 AM
ddoo3105
GX - 1st Gen (2004-2009)
2
01-17-17 07:35 PM
jds4u2
GX - 1st Gen (2004-2009)
1
09-02-16 12:21 PM
S1w99
LS - 3rd Gen (2001-2006)
3
09-02-15 10:20 AM
iewiew
RX - 3rd Gen (2010-2015)
4
06-18-09 02:16 PM



Quick Reply: Center consule will not open 2003



All times are GMT -7. The time now is 04:22 AM.