new member bday present to myself
03-04-11, 02:06 PM
#17
Driver
Join Date: Apr 2010
Location: Cali
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
rear seat pic
03-16-11, 06:12 AM
#18
Rookie
Thread Starter
Join Date: Feb 2011
Location: Canada, Ontario, Mississauga
Posts: 63
Likes: 0
Received 1 Like
on
1 Post
just a update . i received my asr681 from japan right before the tsunami and i got to get it installed 03/14/2011 with the help of this thread . next mod im looking to save for is the youzealand ss pro kit to slam it down. then rims ahahhaha
https://www.clublexus.com/forums/ls4...-with-pix.html
so on stock suspension datacontroller only. here are some of the pics of height differences at the settings.
SET B HEIGHT
SET NORMAL HEIGHT
SET 5 HEIGHT
SET L HEIGHT
https://www.clublexus.com/forums/ls4...-with-pix.html
so on stock suspension datacontroller only. here are some of the pics of height differences at the settings.
SET B HEIGHT
SET NORMAL HEIGHT
SET 5 HEIGHT
SET L HEIGHT
03-16-11, 06:24 AM
#19
Rookie
Thread Starter
Join Date: Feb 2011
Location: Canada, Ontario, Mississauga
Posts: 63
Likes: 0
Received 1 Like
on
1 Post
since i the initial setup for the asr681 is different then the asc680 i am posting this to let future asr681 users know how to set it up and use it. heres the steps i was guided to follow by "FoxCars" users here on clublexus ls600 forum. this can be done anytime you have the car started to reset chasis or set height.
1.start car
2.(must use wireless controller to set it up to have it linked to the wired module)
wireless controller hold all 4 buttons down or both downwards buttons until it beeps then u will see testing mode on the screen, if u hold it longer it will show ver 1.6 on the screen.
3. now ur on the screen to setup which chassis car model u have. for my ls430 05 its 7E i beleive. so press up or down until u select ur model then press mode to set it.
4. now ur on the screen to setup which mode u want to run it in. srd or spl . of course we would want spl for full range of height , then press select button to set it up.
5. now ur on the h1 or h2 set height screens. with asr theres only normal / h1 / h2 settings you can save. in h1 click select and it will blink all 3 variables. choose ur height accordingly and press mode to save. if you wish to go to super low mode, press down until it hits 9 then hold down until it beeps and ull be in L mode.
so hope that helps the future asr681 users. and special thanks for FoxCars once again
1.start car
2.(must use wireless controller to set it up to have it linked to the wired module)
wireless controller hold all 4 buttons down or both downwards buttons until it beeps then u will see testing mode on the screen, if u hold it longer it will show ver 1.6 on the screen.
3. now ur on the screen to setup which chassis car model u have. for my ls430 05 its 7E i beleive. so press up or down until u select ur model then press mode to set it.
4. now ur on the screen to setup which mode u want to run it in. srd or spl . of course we would want spl for full range of height , then press select button to set it up.
5. now ur on the h1 or h2 set height screens. with asr theres only normal / h1 / h2 settings you can save. in h1 click select and it will blink all 3 variables. choose ur height accordingly and press mode to save. if you wish to go to super low mode, press down until it hits 9 then hold down until it beeps and ull be in L mode.
so hope that helps the future asr681 users. and special thanks for FoxCars once again
Last edited by LucidSnow; 03-16-11 at 10:51 AM.
Thread
Thread Starter
Forum
Replies
Last Post
IS_NIICE
Lexus Vehicles Classifieds
10
08-01-12 02:48 PM
ryan330i
LS - 3rd Gen (2001-2006)
19
03-15-11 09:13 PM
