Help my datasystem is acting up
#1
Pole Position
Thread Starter
iTrader: (1)
Join Date: Dec 2009
Location: queens, nyc
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Help my datasystem is acting up
Left the car at the body shop for something. When they finished one side was higher. I turned on the car and the back just went to full down and won't come back up. The pump doesn't sound like it even turns on
what do I do? I tried messing around with all my presets, changed the presets and nothing. Disconnected the battery and stil nothing
please help
what do I do? I tried messing around with all my presets, changed the presets and nothing. Disconnected the battery and stil nothing
please help
#4
Pole Position
Thread Starter
iTrader: (1)
Join Date: Dec 2009
Location: queens, nyc
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
they did some work on my fender.
i hear my pump working but the controller only shows that its trying to pick up the rear shocks. i disconnected the controller and hooked it up like factory but still nothing. i plugged the controller in and while i was putting everything back together the front came down to L since thats the setting i had it. now the car is stuck in L back and rear and i need to move it!!!!
anybody got a air suspension diagram? that would help me out so much.
i hear my pump working but the controller only shows that its trying to pick up the rear shocks. i disconnected the controller and hooked it up like factory but still nothing. i plugged the controller in and while i was putting everything back together the front came down to L since thats the setting i had it. now the car is stuck in L back and rear and i need to move it!!!!
anybody got a air suspension diagram? that would help me out so much.
#5
Driver
iTrader: (2)
Join Date: Feb 2009
Location: JERSEY
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
This is what works for me: With the car off, disconnect the controller from the harness wires. Wait about 2mins. Reconnect the wires to the controller. Start the car up and it will start to readjust its self. Make sure you do this on an evenly flat surface. This happens when the car is shut off during its adjusting on an uneven surface. So, when you turn on the car it throws off the asc.
Trending Topics
#12
Pole Position
Thread Starter
iTrader: (1)
Join Date: Dec 2009
Location: queens, nyc
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
so i took the car to the dealer and they told me that the rear bags are blown. i need a new valve and all my sensors (even though my front ones are still good) are done. seems like im going conventional shock and springs here.
#14
Pole Position
Thread Starter
iTrader: (1)
Join Date: Dec 2009
Location: queens, nyc
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
heres the problem that the dealer told me. they said that since i had the lowering blocks on my car it caused the sensors to get stuck in the up position because i did raise the car before i sent it to the body shop. how the sensors stay stuck in the up position and the car drops is beyond me. stock air is such a headache