LS - 3rd Gen (2001-2006) Discussion topics related to the flagship Lexus LS430

2004 LS430 O2 wiring harness diagram

Thread Tools
 
Search this Thread
 
Old 02-16-17, 09:09 AM
  #1  
alvin9872
Driver School Candidate
Thread Starter
 
alvin9872's Avatar
 
Join Date: Feb 2017
Location: Louisiana
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default 2004 LS430 O2 wiring harness diagram

My bank 1 sensor 1 O2 sensor connector harness wires have pulled out of the plug. I need to find out which wire goes to which pin. Anyone have a wiring diagram for this?
Old 02-17-17, 04:15 AM
  #2  
rkw77080
Lexus Champion
 
rkw77080's Avatar
 
Join Date: Mar 2011
Location: Texas
Posts: 2,186
Received 675 Likes on 462 Posts
Default

Here you go...

Old 01-28-18, 01:41 AM
  #3  
blubly
Driver School Candidate
 
blubly's Avatar
 
Join Date: Apr 2014
Location: austria
Posts: 9
Received 0 Likes on 0 Posts
Default

Hello,
I Have the same Problem on my 04
I connect anything something wrong
to confirm
ox2 on ox1a = blue on sensor this is the black shielded on harness car side
e1 on 01A = white on sensor this is the brown on harness car side

is this so correct ?

i connected it so but sensor reads in techstream always only 0.07V


I connectet it at first wrong maybe i killed my ECU ?

Testet 2 o2 sensors the new one (what i connectet wrong) and the old one!

Last edited by blubly; 01-28-18 at 02:07 AM.
Old 01-28-18, 05:56 AM
  #4  
rkw77080
Lexus Champion
 
rkw77080's Avatar
 
Join Date: Mar 2011
Location: Texas
Posts: 2,186
Received 675 Likes on 462 Posts
Default

What you described is correct, but please note that there are 2 black wires on the harness-side (pin 2 and pin 3) - first check to make sure they are in the correct spot.

Are you getting any DTC's (Diagnostic Trouble Codes) like P0031 or P0032? Attached are troubleshooting procedures for the O2 sensors...
Attached Files
File Type: pdf
P0031.pdf (113.1 KB, 904 views)

Last edited by rkw77080; 01-28-18 at 06:02 AM.
The following users liked this post:
blubly (01-28-18)
Old 01-28-18, 06:46 AM
  #5  
blubly
Driver School Candidate
 
blubly's Avatar
 
Join Date: Apr 2014
Location: austria
Posts: 9
Received 0 Likes on 0 Posts
Default

No just got random missfire bank 1

but didnt drive the car, car is still on car lift!


the black one with the shield is the sensor iam right or ?
Old 02-04-18, 09:14 AM
  #6  
blubly
Driver School Candidate
 
blubly's Avatar
 
Join Date: Apr 2014
Location: austria
Posts: 9
Received 0 Likes on 0 Posts
Default

SO... now O2 Probe works..

But i get now Error Code for the Heater.. Resistance low but the Probe is OK ~ 15 OHM tested also another Probe!
After Lil driving comes the Code.....

12V I have also at the Plug by the heater wires

any idea ?
Old 12-06-19, 04:07 AM
  #7  
Gertwiese
Driver School Candidate
 
Gertwiese's Avatar
 
Join Date: Dec 2019
Location: south africa
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Good day
i have build an LS430 v8 into my tata xenon and its running but as soon as it drop under 2000 rpm it goes in to an limp mode i have tested all the sensors and the ecu it all works and now they tell me to by an new harness is there any where ells i can look for such an problem.
Old 07-23-21, 09:52 AM
  #8  
Luat55
Driver School Candidate
 
Luat55's Avatar
 
Join Date: Jul 2021
Location: Hà Nội
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Car autu

please give me electrical diagram of lexus ls430 2004 3uz-fe v8 4.3l . engine
Old 12-12-22, 01:14 PM
  #9  
paulf66
1st Gear
 
paulf66's Avatar
 
Join Date: Dec 2022
Location: Philadelphia
Posts: 1
Likes: 0
Received 1 Like on 1 Post
Default

My bank 1 sensor 1 O2 sensor connector harness wires have pulled out of the plug. I need to find out which wire goes to which pin.i.e Upper left lower left upper right lower right …. Anyone have a wiring diagram for this?
The following users liked this post:
Johnnychau (09-05-23)
Old 03-03-23, 01:50 PM
  #10  
Dflo500
1st Gear
 
Dflo500's Avatar
 
Join Date: Mar 2023
Location: Az
Posts: 1
Likes: 0
Received 1 Like on 1 Post
Default O2

Originally Posted by rkw77080
What you described is correct, but please note that there are 2 black wires on the harness-side (pin 2 and pin 3) - first check to make sure they are in the correct spot.

Are you getting any DTC's (Diagnostic Trouble Codes) like P0031 or P0032? Attached are troubleshooting procedures for the O2 sensors...

do you have an image of the stock location on the pins on the plug from the car?
The following users liked this post:
Johnnychau (09-05-23)
Old 09-05-23, 08:14 PM
  #11  
Johnnychau
2nd gear
 
Johnnychau's Avatar
 
Join Date: Sep 2023
Location: CA
Posts: 2
Received 0 Likes on 0 Posts
Default Need help!

Originally Posted by paulf66
My bank 1 sensor 1 O2 sensor connector harness wires have pulled out of the plug. I need to find out which wire goes to which pin.i.e Upper left lower left upper right lower right …. Anyone have a wiring diagram for this?
Hey! I just did this exact thing today and need some help! We're you able to to determine where each of the wire goes into the plug? Omw stuck please help 🙏🙏
Old 09-05-23, 08:17 PM
  #12  
Johnnychau
2nd gear
 
Johnnychau's Avatar
 
Join Date: Sep 2023
Location: CA
Posts: 2
Received 0 Likes on 0 Posts
Default

Originally Posted by paulf66
My bank 1 sensor 1 O2 sensor connector harness wires have pulled out of the plug. I need to find out which wire goes to which pin.i.e Upper left lower left upper right lower right …. Anyone have a wiring diagram for this?
Originally Posted by Dflo500
do you have an image of the stock location on the pins on the plug from the car?
Did you get this resolved? Need help!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
msekanha
ES - 1st to 4th Gen (1990-2006)
3
08-07-12 02:12 PM
Lewandoski
GS - 2nd Gen (1998-2005)
2
08-06-12 10:48 PM
luey2010
LS - 3rd Gen (2001-2006)
3
10-17-10 08:42 PM
J_LS
GS - 2nd Gen (1998-2005)
1
05-11-09 12:44 PM



Quick Reply: 2004 LS430 O2 wiring harness diagram



All times are GMT -7. The time now is 12:24 AM.