solo

iTrader: (4)

has anybody done a 20x9.5 and 20x10.5 on 35mm offset...?
tire sizes will be 235/30 and 245/35


let me know.

Raph TT

245s on 10.5s will strech theoretically.. but 245mms is about 10inches .. depends on the tire maker

solo

iTrader: (4)

this is +35mm front and back on 9.5 and 10.5
but inner fenders were heavily modified but not pulled or rolled
on air sus of course.


s

rominl

iTrader: (4)

both front and rear inner fenders got modded? even at driving height? i am surprised. 10" normal offset should fit in the rear easily, with 10.5 +35 i would expect no inner mods needed. lol i actually thought you'd go more aggressive front and rear

btw, when you said inner fender, you mean the fender flap right?

solo

iTrader: (4)

these numbers are straight from JB Design. Its definitely not as agreesive compared to a GS but looking around, if I do not roll the rears that is the range. If there are pulling or rolling front and rear, I can squeeze 10 and 11 with mid 20's offset.

i will keep you posted after i do a test fit next weekend.


s

anotherLS

iTrader: (9)

hey Solo! its Emerson, did you pick up a LS430??? guess we are in the same boat now...you dont wanna run a 9F and 10R with +30 offset? you can look on the Fabulous page and look at their specs also and they are running a 245/35 and 285/30 looks like just trimming the fender though...

icedowt

yea i was interested in this too glad i looked before i posted

rominl

iTrader: (4)

solo, if you are doing it anyway, i don't see why not shave the whole fender to gain that extra space. that could give the car a different stance than normal setup

solo

iTrader: (4)

wsup E. yeah, i got a new project. i guess im gonna have to put on my air first to figure out the offsets. yeah the fabulous website has really aggresive offsets, but it does not say if they have pulled or rolled their fenders...

what sizes are u rocking..?

solo

iTrader: (4)

yeah, those numbers are for shaved fenders. keep in mind its 20's too. if it was 19s, the offset can be more aggresive. i'll post what i find out.

anotherLS

iTrader: (9)

i was rocking 20x9 +37 R disk with 245/35, and 20x10 +47 O disk with 275/30 Work Rezax II that i got from Alan at Work Wheels off his 430...sold those awhile back, now just saving for new wheels...the front had like 2mm clearance from the caliper...really close, rear had tons of room...think i couldve went with like a +37 with no fender mods for the rear since there was alot of stock camber already without adjusting anything

hope that helps a little bro

rominl

iTrader: (4)

true, 20s probably will have less clearance. but still, 10.5 +35 that doesn't sound super aggressive (the kind of setup solo would run )

solo

iTrader: (4)

just u wait. =)

SWEETSOUND2001

Do you guys know if 20 x 9 and 20 x 10 with ET35 will be ok for non-vip setup?

I already rolled my fenders and going to run 255/40/19 and 285/35/19 tires (PS2).

Thanks

GSoup

Any updates Solo???