Go Back   Club Lexus Forums > Lexus Model Forums > LS Models > LS430
Sign in using an external account
Register Forgot Password?

Strut Replacement

Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old 01-05-08, 04:03 PM   #1
grunner58
Driver School Candidate
Trader Score: (0)
 
Join Date: Jan 2008
Location: GA
Posts: 5
Default Strut Replacement

I'm thinking about repalcing the struts on my 2004 LS430 with 60k miles and was wondering at what mileage the rest of you replace the struts and has anyone tried going to the Sport strut w/o air suspension vs the standard w/o air suspension strut. Is the sport a direct swap for the standard? Price seems to be around $115 for the rear strut and $185 for the sport.

Any chance Bilstein has a replacement?

Thanks for the input.
This ad is not displayed to registered members.
Register your free account today and become a member on Club Lexus!
grunner58 is offline   Reply With Quote
Old 04-21-10, 01:39 PM   #2
jpaulmac
Driver School Candidate
Trader Score: (0)
 
Join Date: Apr 2010
Location: Florida
Posts: 28
Default

hey grunner58, i've been looking around this forum on how to replace the front struts (instructions with pics will help too) but not having any luck. Have you replaced yours? can you tell me how? Thanks much man.
jpaulmac is offline   Reply With Quote
Old 04-21-10, 04:23 PM   #3
GLIDESUL
Lead Lap
Trader Score: (0)
 
GLIDESUL's Avatar
 
Join Date: Mar 2009
Location: Md
Posts: 664
Tony glide
Default

It should be a theard on replacing shocks. But if you wanna go autozone.com and register yourself and car, then go to diy section then repair info section. Pretty much every part they sell they have installation guide. Try it out it may help you. You dont have to buy the part to find out how to remove and install it.
__________________
IT IS WHAT IT IS . 2002 LS 430 UL.
2011 bmw f25 x3
GLIDESUL is offline   Reply With Quote
Old 04-21-10, 08:54 PM   #4
CW2004LS43
Driver School Candidate
Trader Score: (0)
 
Join Date: Dec 2009
Location: OREGON
Posts: 24
Default

KYB makes a replacement set. I found a set of 4 for $398 using Google. They should be very similar to your sport shocks.
CW2004LS43 is offline   Reply With Quote
Old 04-22-10, 10:43 AM   #5
jpaulmac
Driver School Candidate
Trader Score: (0)
 
Join Date: Apr 2010
Location: Florida
Posts: 28
Default

Thanks guys! will look it up.
jpaulmac is offline   Reply With Quote
Old 04-22-10, 10:44 AM   #6
jpaulmac
Driver School Candidate
Trader Score: (0)
 
Join Date: Apr 2010
Location: Florida
Posts: 28
Default

Quote:
Originally Posted by CW2004LS43 View Post
KYB makes a replacement set. I found a set of 4 for $398 using Google. They should be very similar to your sport shocks.
My LS does not have the sport suspension. I found an oem from trademotion.com for 99 a piece new. I will go for this one. But thanks though.
jpaulmac is offline   Reply With Quote
Old 04-22-10, 01:28 PM   #7
xuserx04
Lead Lap
Trader Score: (5)
 
xuserx04's Avatar
 
Join Date: Jan 2008
Location: New York
Posts: 595
Send a message via ICQ to xuserx04
Default

Quote:
Originally Posted by jpaulmac View Post
hey grunner58, i've been looking around this forum on how to replace the front struts (instructions with pics will help too) but not having any luck. Have you replaced yours? can you tell me how? Thanks much man.

You need a special tool, a compressor of sort to get the springs off. So i dont think this is something for diy.
__________________
2004 Lexus LS430 ML
xuserx04 is offline   Reply With Quote
Old 04-22-10, 03:20 PM   #8
buggs384
Driver
Trader Score: (0)
 
Join Date: Oct 2006
Location: IL
Posts: 146
Default

no special tool to remove the strut with the spring from the car. But once its out then a special tool is required to remove/replace the spring. I took mine to a local mechanic and he swapped out the springs for free, although I did buy him lunch.
buggs384 is offline   Reply With Quote
Old 04-23-10, 08:27 AM   #9
I6turbo
Lexus Test Driver
Trader Score: (1)
 
Join Date: Jun 2005
Location: FL
Posts: 1,524
Default

Quote:
Originally Posted by xuserx04 View Post
You need a special tool, a compressor of sort to get the springs off. So i dont think this is something for diy.
Actually it's a pretty easy DIY job, but you'll need the spring compressor like you said. The compressor is a simple device that you can buy for a few bucks -- no need to get a fancy one. http://www.harborfreight.com/cpi/cta...=112&zmap=3980
__________________
2005 LS430 Flint/Black -- 19" LE37's, Tint
2003 GX470 Ash Blue/Charcoal -- Can't figure a way to improve on stock
1995 Supra T Black/Tan -- 24K miles, 900HP
2007 Audi A3 - 2003 LS430 - 2001 BMW M3 - 2001 M-B CLK430 (<- all sold)
I6turbo is offline   Reply With Quote
Old 04-23-10, 07:14 PM   #10
SteveM
Driver
Trader Score: (0)
 
SteveM's Avatar
 
Join Date: Jan 2010
Location: Alberta, Canada
Posts: 184
Default

Quote:
Originally Posted by I6turbo View Post
Actually it's a pretty easy DIY job, but you'll need the spring compressor like you said. The compressor is a simple device that you can buy for a few bucks -- no need to get a fancy one.
I think I may have to attempt this also. Have you done this job yourself? Any additional insight would be very much appreciated! Thanks
__________________

2005 LS430 Mercury Metallic / Grey Premium
1997 ES300 AVS Cashmere Beige Metallic 18" Chrome
2001 GMC Sierra 1500 (Sold)
1991 Honda Prelude Si (Sold)
SteveM is offline   Reply With Quote
Old 04-23-10, 09:20 PM   #11
motohide
Pole Position
Trader Score: (0)
 
motohide's Avatar
 
Join Date: Dec 2005
Location: CA
Posts: 319
moto miwa
Default

Quote:
Originally Posted by SteveM View Post
I think I may have to attempt this also. Have you done this job yourself? Any additional insight would be very much appreciated! Thanks
Given you've done this before, perhaps on another car, its not a difficult process in concept. The LS430 does however present a lot of additional tasks to get to the component unlike a smaller or older car. The rear seat back and shelf area need to come out to get to the top screws htat hold the assembly in place. Also, the multi-link, double wishbone suspension is quite beefy and it is a much easier task to work between them and force bushings in different directions to nudge the things out after they are all unsecured.

It is MUCH easier if one has access to power air tools, and more imporatnly a rack that can raise the car to decent height. (You'd better be prepared for a full day of cussing and yelling if you plan to do this on jackstands. ALthough it isn't impossible.)

Only real SST needed is a spring compressor but be careful, the larger the car, the stronger the spring, and if you slip the thing on a LS430 spring, you'd have the top mount flying through the garage ceiling and into your bedroom above. (NEVER EVER, work with spring compressor with your body or face near the top mount as you compress, and work with springs.)

Also, anytime you disassemble the suspension even partially, the wheel alignment will go slightly off, so be sure to get a 4 wheel alignment once things are all buttoned up.

Most tuner shops will be equipped to do this well, and cost for this labor is very cheap due to the competition for aftermarket suspension installations. Most shops will not charge more than $200-300 not including alignment.

So for me, I would just rather take it to the shop, than to do this myself in a garage without a hydraulic lift. A shop will take 2 hours max. Yourself? it will take 4 hours minimum hours with a buddy helping, by the time you clean up the mess and get all the things you did wrong sorted out.

I've done many many installs and in the case of a LS430, I will still prefer to take it to a shop. Especially when they can work clean, with two or more people dividing tasks. If you do it yourself, you are likely climbing in and out of your interior, and dirty greasy bottom of the car...making it hard to stay clean...
__________________
Moto-P
founder Club4AG.com

http://www.flickr.com/photos/moto_cl...7622279332059/
motohide is offline   Reply With Quote
Old 04-23-10, 09:29 PM   #12
motohide
Pole Position
Trader Score: (0)
 
motohide's Avatar
 
Join Date: Dec 2005
Location: CA
Posts: 319
moto miwa
Default

On the topic of age...

A shock absorber (strut inserts inclusive) on a strut, a normal car will show leaks and reduced damping at 20K miles or so. This is not to say they are no longer useful, its just they do gradually lose damping throughout the life of the dampers. That is it will show with a back to back testing on a car with no miles since fresh install...especially in mission critical venues like autocross or track (though LS430 are unlikely to find themselves in these venues...I'm only saying for cars that I do race with and they have much less suspension travel than a very long stroke OEM LS suspension...)

I'd say 50K is about time when they are due for replacement if you like your OEM strut to be working similar to new. Also some of the suspension/chassis bushings should be replaced at the same time, as well as transmission mount and engine mount.

None of these parts fail frequently before 150K miles on any LS, this is just a guideline to keep the car in good shape, to do it at about 50K miles.
__________________
Moto-P
founder Club4AG.com

http://www.flickr.com/photos/moto_cl...7622279332059/
motohide is offline   Reply With Quote
Old 04-25-10, 12:49 PM   #13
SteveM
Driver
Trader Score: (0)
 
SteveM's Avatar
 
Join Date: Jan 2010
Location: Alberta, Canada
Posts: 184
Default

Quote:
Originally Posted by motohide View Post
Given you've done this before, perhaps on another car, its not a difficult process in concept. The LS430 does however present a lot of additional tasks to get to the component unlike a smaller or older car. The rear seat back and shelf area need to come out to get to the top screws htat hold the assembly in place. Also, the multi-link, double wishbone suspension is quite beefy and it is a much easier task to work between them and force bushings in different directions to nudge the things out after they are all unsecured.

It is MUCH easier if one has access to power air tools, and more imporatnly a rack that can raise the car to decent height. (You'd better be prepared for a full day of cussing and yelling if you plan to do this on jackstands. ALthough it isn't impossible.)

Only real SST needed is a spring compressor but be careful, the larger the car, the stronger the spring, and if you slip the thing on a LS430 spring, you'd have the top mount flying through the garage ceiling and into your bedroom above. (NEVER EVER, work with spring compressor with your body or face near the top mount as you compress, and work with springs.)

Also, anytime you disassemble the suspension even partially, the wheel alignment will go slightly off, so be sure to get a 4 wheel alignment once things are all buttoned up.

Most tuner shops will be equipped to do this well, and cost for this labor is very cheap due to the competition for aftermarket suspension installations. Most shops will not charge more than $200-300 not including alignment.

So for me, I would just rather take it to the shop, than to do this myself in a garage without a hydraulic lift. A shop will take 2 hours max. Yourself? it will take 4 hours minimum hours with a buddy helping, by the time you clean up the mess and get all the things you did wrong sorted out.

I've done many many installs and in the case of a LS430, I will still prefer to take it to a shop. Especially when they can work clean, with two or more people dividing tasks. If you do it yourself, you are likely climbing in and out of your interior, and dirty greasy bottom of the car...making it hard to stay clean...
Thanks for the insight, it has been very helpful. I have done similar jobs on older vehicles with less complex components using air tools on jackstands. It sounds like what I might have found out the hard way is that the LS430's suspension components might be overly challenging for an amateur without the benefit of a fully outfitted garage. I'll be taking it to a shop when the time comes. Thanks again and many great points, some of which I overlooked.
__________________

2005 LS430 Mercury Metallic / Grey Premium
1997 ES300 AVS Cashmere Beige Metallic 18" Chrome
2001 GMC Sierra 1500 (Sold)
1991 Honda Prelude Si (Sold)
SteveM is offline   Reply With Quote
Old 06-01-10, 11:21 AM   #14
stropp
Driver School Candidate
Trader Score: (0)
 
Join Date: May 2010
Location: TX
Posts: 33
Default

what chassis bushings need to be replaced? Transmission mounts? I am going to try this myself as I am getting quoted $750 to install springs and shocks all the way around... (labor only as I am supplying the parts....)

does that sound unreasonable?
stropp is offline   Reply With Quote
Old 06-02-10, 09:00 AM   #15
ogriebl
Driver School Candidate
Trader Score: (0)
 
Join Date: Nov 2005
Location: TX
Posts: 16
Default

I am also planning on doing the strut replacement myself - I bought KYB-G2 struts online for $300 (all four).

I need to order strut mounts (might as well replace these while I am in there) - any good/cheap sources for these from anyone?

I am still looking for a good DIY with pics - I plan to put together a DIY when I do this myself but need some details / pics to help me get started.

FYI - regarding special tools for the job: 1) the spring compression tool can be "checked out" for free from any Autozone / Advanced Auto store. You just have to give them a credit card for a deposit that you get back once you return the tool. 2) I have heard that a breaker bar is useful for the job as some of the bolts are on very tight. 3) A torque wrench is needed to tighten everything to spec.
ogriebl is offline   Reply With Quote
Old 06-02-10, 09:00 AM
 
 
 
 
Reply

Tags
2004, 60k, bilstein, cost, coupe, gs, gs400, infinity, lexus, mileage, recommended, replacement, replacing, shocks, strut, struts

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bad Front Strut.......need information... hlippy4 LS430 3 10-14-14 05:22 PM
How To Convert Air Suspension to Conventional Struts gstromb101 LS430 1 08-13-14 09:45 AM
Coil Springs To Correct Ride Height bluemach1 ES300 and ES330 4 01-27-14 05:12 PM
Replace factory air suspension with regular shocks/struts? Din LS460, LS460L and LS600h 2 09-20-12 05:17 PM
Air suspension, '94 rear strut install.... gottahaveit2 LS400 17 03-31-06 05:40 AM

All times are GMT -7. The time now is 04:32 AM.

Join ClubLexus
Advertising


Copyright © 2000-2008 Internet Brands, Inc. All Rights Reserved
Privacy Policy | Disclaimer | Terms of Use | JOBS


Get all contact info