Broke battery tray bolts... Suggestions
#3
#5
I've yet to have the need to examine the battery tray and the surrounding area in my car. So what follows might not be applicable. Just throwing out ideas.
Easy/Cheap:
Can you drill out the studs, install bolts from underneath and secure the tray with nuts?
Easy/Expensive (requires special tool)/Wow Factor:
You can drill out the studs and install rivet nuts in the holes. Then secure the tray with bolts.
Easy/Cheap:
Can you drill out the studs, install bolts from underneath and secure the tray with nuts?
Easy/Expensive (requires special tool)/Wow Factor:
You can drill out the studs and install rivet nuts in the holes. Then secure the tray with bolts.
#6
I've yet to have the need to examine the battery tray and the surrounding area in my car. So what follows might not be applicable. Just throwing out ideas.
Easy/Cheap:
Can you drill out the studs, install bolts from underneath and secure the tray with nuts?
Easy/Expensive (requires special tool)/Wow Factor:
You can drill out the studs and install rivet nuts in the holes. Then secure the tray with bolts.
Easy/Cheap:
Can you drill out the studs, install bolts from underneath and secure the tray with nuts?
Easy/Expensive (requires special tool)/Wow Factor:
You can drill out the studs and install rivet nuts in the holes. Then secure the tray with bolts.
Trending Topics
#9
Lexus Champion
iTrader: (1)
I dont think so, just having a little fun....... old men just hunt things to do.... just think, I have been retired for 18+ years... gets dull around here..... BUT my check engine light came on yesterday p0125 .. same as last year.. Insufficient Coolant Temperature for Closed Loop Fuel Control
we had to remove the 02 wire and clean (oil leak) the connectors, male & female before it would heat up enough to go into closed loop.. that worked, but I am too old to get under it so I am waiting for my nephew to do it for me... Sorry old cars arnt they.... hehehe, I love 'em
we had to remove the 02 wire and clean (oil leak) the connectors, male & female before it would heat up enough to go into closed loop.. that worked, but I am too old to get under it so I am waiting for my nephew to do it for me... Sorry old cars arnt they.... hehehe, I love 'em
#11
Forum Administrator
iTrader: (2)
Just head to your local Advance auto or Pep Boys. Show them the issue and they'll have a number of cheap solutions from the rubber tie down to new hooks / studs.
PS, you are right to be concerned - loose batteries can cause all sorts of issues and accidents so don't let it ride around for long like that.
PS, you are right to be concerned - loose batteries can cause all sorts of issues and accidents so don't let it ride around for long like that.
#12
Just head to your local Advance auto or Pep Boys. Show them the issue and they'll have a number of cheap solutions from the rubber tie down to new hooks / studs.
PS, you are right to be concerned - loose batteries can cause all sorts of issues and accidents so don't let it ride around for long like that.
PS, you are right to be concerned - loose batteries can cause all sorts of issues and accidents so don't let it ride around for long like that.
#13
Lexus Test Driver
iTrader: (3)
Rivnuts or nutserts are actually pretty cheap. You can pick up the tool with aluminum nutserts for about $25 from harbourfreight or similar. And it's also great for mounting stuff in the car, like a sub box, custom paneling, etc...
This would be the best option all around, just have to drill out or as close to the old studs as possible.
This would be the best option all around, just have to drill out or as close to the old studs as possible.
#14
Rivnuts or nutserts are actually pretty cheap. You can pick up the tool with aluminum nutserts for about $25 from harbourfreight or similar. And it's also great for mounting stuff in the car, like a sub box, custom paneling, etc...
This would be the best option all around, just have to drill out or as close to the old studs as possible.
This would be the best option all around, just have to drill out or as close to the old studs as possible.
#15
drill 2 quater inch holes where the tray meets the fender and use some epoxy putty,just ball up about half an inch of the putty and force it into the holes of both the tray and fender it shoud dry in 2 hours and be hard the next day .Make sure the putty is as flat as possible.Make sure the battery does not sit on a large bump of epoxy. One trick is to finish the top smooth by wetting your finger with water and rubbing the epoxy putty flat and smooth.I have found this repair to hold almost anything that has both weight and size and you can still use tie downs after the repair is done if you feel the need to.