Need help this afternoon 9/18 - Air Intake hose ripped
09-18-14, 01:39 PM
#1
Driver School Candidate
Thread Starter
Join Date: Oct 2011
Location: GA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Need help this afternoon 9/18 - Air Intake hose ripped
Ok, So I had my engine mounts replaced yesterdat and then the car started to run like crap and finally threw a code today. p01702 too rich. I figured it was MAF so when I went to take it off I realized that the Air Intake hose was ripped 3/4 the way around. So blame aside. I need to have this car on the road tomorrow and I won't be able to get to any store until about 8:30 tonight.
does anyone know if there is a "universal" part that might fit or give me ideas on how to repair? I can have a part delivered tomorrow, but that won't help getting me to work.
does anyone know if there is a "universal" part that might fit or give me ideas on how to repair? I can have a part delivered tomorrow, but that won't help getting me to work.
09-18-14, 01:42 PM
#2
Driver School Candidate
Thread Starter
Join Date: Oct 2011
Location: GA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
More info 1996 LS400.
I'm going to try to Electrical tape it once I get some tape. Hopefully that will hold until the part gets in.
I'm going to try to Electrical tape it once I get some tape. Hopefully that will hold until the part gets in.
Last edited by idriveals4; 09-18-14 at 01:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
AlaskanLS
LS - 1st and 2nd Gen (1990-2000)
6
02-15-17 09:39 PM