need a measurement of 2nd gen wheel hub:
#1
Instructor
Thread Starter
need a measurement of 2nd gen wheel hub:
I need a measurement of the little lip part on the 2nd gen wheel hub. Diameter of the wheel hub on any LS is 60.08mm mostly rounded to 60.1mm, but where rotors rest on the hub, the diameter is greater - it should be 62mm. But what is the exact depth of that part of the hub where rotor fits? From what I gathered, it should be at least 5.5mm, but it may be more than that - I don't know as I don't have one on me.
If any one of you is working on your brakes or taking rotors off for whatever reason, and if you have a metric caliper, can you take these measurements for me?
Thanks!
If any one of you is working on your brakes or taking rotors off for whatever reason, and if you have a metric caliper, can you take these measurements for me?
Thanks!
#3
Instructor
Thread Starter
I actually need both rear and front. I think they may be the same, and are probably about 6mm deep, but need to confirm that.
Thanks!
p.s. Just edited my reply to include a picture explaining what I need
Thanks!
p.s. Just edited my reply to include a picture explaining what I need
Last edited by peterls; 08-08-14 at 09:32 AM.
Thread
Thread Starter
Forum
Replies
Last Post
BUSTN
Wheels, Tires & Brakes Forum
5
08-17-06 07:22 AM