Lexus LS400 seats
#3
BahHumBug
iTrader: (10)
won't bolt-in, will require fabrication.
won't plug in without redoing all the wiring
have airbags, good luck with those.
A member in the past had thread about retrofitting LS430 seats, I would look at his to get an idea of what's involved.
won't plug in without redoing all the wiring
have airbags, good luck with those.
A member in the past had thread about retrofitting LS430 seats, I would look at his to get an idea of what's involved.
Last edited by PureDrifter; 04-01-14 at 12:33 AM.
#4
Try swapping the rails from your first gen to those seats. If that doesn't work, I doubt it would be that hard to fab up some custom ones. I imagine the wiring shouldn't be that hard as well, at least for the original functions. If the new seats are heated then that's a different story.
If you decide to go for it, compose a detailed write up for our community
I strongly support the creativity and ingenuity of an unorthodox approach to any car modification. Good Luck.
If you decide to go for it, compose a detailed write up for our community
I strongly support the creativity and ingenuity of an unorthodox approach to any car modification. Good Luck.
Thread
Thread Starter
Forum
Replies
Last Post