Aftermarket steering wheel thread!
#46
Driver School Candidate
Join Date: Jan 2015
Location: wa
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
By chance you could make another dash table and ship it to Washington djsurfer?
#47
Driver School Candidate
Join Date: Aug 2017
Location: California
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2
#49
Driver School Candidate
Finally had some time to mess with the cruise control setup. I took it all apart and mounted the factory lever just under the steering wheel. It was actaully really easy. It's just three wires that I had to spice together. Then i just drilled a few little holes in the bottom plastic cover, and wrapped two black zip ties around it to hold it in place.
It works just like normal, and I can easily use it right threw the wheel. If your not looking for it you really dont notice it's there either. Now just to figure out how to get the horn working without having a wire getting wrapped up when you turn the wheel. I might just put a button some where, if I cant come up with a easy solution.
It works just like normal, and I can easily use it right threw the wheel. If your not looking for it you really dont notice it's there either. Now just to figure out how to get the horn working without having a wire getting wrapped up when you turn the wheel. I might just put a button some where, if I cant come up with a easy solution.
Thread
Thread Starter
Forum
Replies
Last Post
SQ-LS
LS - 1st and 2nd Gen (1990-2000)
25
08-26-09 12:01 PM
houstonnw
LS - 1st and 2nd Gen (1990-2000)
12
06-09-04 05:45 PM
mayandoom
2Gen GS430 / 400/ 300 Classifieds (98-05)
15
08-29-03 02:21 PM