g3t0ut

I have a UCF20 and the key in lock only rolls up and down the driver window. I always thought it was supposed to do both the front windows if not all. If that is the case what could be causing it to only be working with the drivers window.
thanks

akitomk3

iTrader: (2)

i think it will only work for the driver side as i remember on my car it didn't roll down the passenger front window

dengman

my key lock rolls down all my windows and opens the roof. and it rolls them up. Key fob rolls down all the windows when I hold unlock too.

YoshiMan

95-97 only does the drivers window

PureDrifter

iTrader: (10)

My old '95 did all 4 windows and the sunroof.
EDIT: maybe my memories acting up though, it has been 6-7 years...

OP needs to specify what generation UCF20 he has ('95-97 or '98-00)

Gene01

Is it possible that the differences are due to alternate options in CBEST?

HotTubTony

Do UCF10's do this?

diamondave

should my 1996 do this? someone said holding the unlock on the key remote would do this but it doesnt

RA40

iTrader: (6)

I was cheated...our '97 does the driver door only.

Another annoyance is the sun roof which isn't a one touch close. I can see the safety aspect, this has been one of my peeves since the Cressida was one touch. Oh well.

rome99LS

Mine does all 4 windows plus sunroof. I love it too.

YoshiMan

Yes, your 96 has the feature, but its done with the actual key in the door lock cylinder, not the remote. Turn and hold the key in the unlock position, and the window will roll down. Hold it in the lock position, and well, you know the rest

diamondave

Well i checked mine this morning and it only rolls down the drivers side only down. i have heard that some peoples will roll down all windows and open sunroof. is there a way to reprogram this feature or is mine malfunctioning?

YoshiMan

Thats the way it was set up from the factory, so there is likely nothing on that circuit even connected to the other door windows. Hence, no way to reprogram it if the circuitry doesnt exist.