Post up your Rear muffler set-up!!! In need of inspiration!!
#20
found a setup i really like
i'm thinking of running dual exhaust tip like this but maybe a little smaller and with slant cut tip.
maybe something like this
http://www.ebay.com/itm/STAINLESS-DU...06fbc1&vxp=mtr
i'm thinking of running dual exhaust tip like this but maybe a little smaller and with slant cut tip.
maybe something like this
http://www.ebay.com/itm/STAINLESS-DU...06fbc1&vxp=mtr
Last edited by RA010623; 06-26-12 at 09:33 PM.
#21
#23
Driver School Candidate
Thread Starter
Looking towards dual tips now. Those fabulous set look clean. Scraped holes in my stock ucf20 exhaust on the way back from the BOS meet. Took it to a local muffler shop. Cut off my flanges after the cat, deleted the resonator and mid muffler, added an x-pipe and 2.25" piping all the way down. Still have the stock rear mufflers though. Looking for the right look. Amazing clearance with what's been done though.
#24
i'm still deciding if i should keep the stock Y pipe and cut off the exhaust after the stock Y and just replace the 2nd muffer and axle back with magnaflow 10428
i want the keep my exhaust relatively quiet it's a luxury car after all
i want the keep my exhaust relatively quiet it's a luxury car after all
#25
Driver School Candidate
Thread Starter
Doesn't sound like a bad idea. Actually looks good. Were you keeping the resonator? just curious. You would have to find some sleek mufflers for the mid muffler set-up though. I removed the cat flange, resonator and the mid mufflers just so the shop could tuck everything above frame level.I was scraping my mid mufflers like crazy before.
#30
Doesn't sound like a bad idea. Actually looks good. Were you keeping the resonator? just curious. You would have to find some sleek mufflers for the mid muffler set-up though. I removed the cat flange, resonator and the mid mufflers just so the shop could tuck everything above frame level.I was scraping my mid mufflers like crazy before.
i think if you want to replace the center exhaust maybe you can replace with a resonator or CAT or maybe something like this http://www.magnaflow.com/02product/s...=main&id=10134 which you should be able to tuck it pretty tight against the body to avoid rubbing.