No sound with aftermarket Headunit
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2012
Location: NSW
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
No sound with aftermarket Headunit
Okay I took my factory Pioneer headunit out and wired up my power, accessories and ground. Then i tried to search for a wiring diagram for speaker wires, found one and then when i wired up my speaker wires no sound came out. Can somebody confirm which wires go to what? Thanks
#4
do you hear any beeps or clicks when navigating through the stereo menu?
or no audio at all?
#5
Driver School Candidate
Thread Starter
Join Date: Jun 2012
Location: NSW
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
im putting in a Sony CDX-GT280, and nope no audio at all, i put OEM headunit back in and sound came through, just is weird i wire up speakers as per that diagram and no sound at all coming from the Sony
#6
double check the wire connections from the stereo to the new harness. make sure there's wire to wire connection.
i used those stereo wire splices (where you stick each correlating wires in and the metal splices them making a connection between the wires) and half of them barely cut through
i used those stereo wire splices (where you stick each correlating wires in and the metal splices them making a connection between the wires) and half of them barely cut through
Trending Topics
#8
From what I'm told and found it will be easier to run new wires to all the old speakers. Might be a good time to upgrade all your speakers and get rid of the factory amp, sub and deck. could prolly sell amp, speakers/sub and deck a cover at least part of the price of the new speakers.
Thread
Thread Starter
Forum
Replies
Last Post
appraiser
Lexus Audio, Video, Security & Electronics
2
08-06-11 10:24 AM