95 LS400 rear wheel bearing
#1
Lead Lap
Thread Starter
95 LS400 rear wheel bearing
My rear driver side wheel bearing is shot.
I have searched for info and price estimates for this without any luck.
And the prices I have found ranged from 400 total at toyota to over 1200 at some dealerships.
Im guessing ill need a hub and all that good stuff too.
Does anybody have an accurate price estimate for this?
How difficult is this job? Can I do it myself If I take it to a shop to press whatever I need too?
I have searched for info and price estimates for this without any luck.
And the prices I have found ranged from 400 total at toyota to over 1200 at some dealerships.
Im guessing ill need a hub and all that good stuff too.
Does anybody have an accurate price estimate for this?
How difficult is this job? Can I do it myself If I take it to a shop to press whatever I need too?
#3
Lexus Champion
iTrader: (1)
My rear driver side wheel bearing is shot.
I have searched for info and price estimates for this without any luck.
And the prices I have found ranged from 400 total at toyota to over 1200 at some dealerships.
Im guessing ill need a hub and all that good stuff too.
Does anybody have an accurate price estimate for this?
How difficult is this job? Can I do it myself If I take it to a shop to press whatever I need too?
I have searched for info and price estimates for this without any luck.
And the prices I have found ranged from 400 total at toyota to over 1200 at some dealerships.
Im guessing ill need a hub and all that good stuff too.
Does anybody have an accurate price estimate for this?
How difficult is this job? Can I do it myself If I take it to a shop to press whatever I need too?
#6
Lead Lap
Thread Starter
#7
Lead Lap
Thread Starter
Trending Topics
#8
Lexus Champion
iTrader: (1)
knockoff the 77 that is someone trying to use the OEM number and adding their 77 on the end so Lexus cant sue them.... for using their numbers. why do you want a chinese part instead of japan??
until YOU tare it down and see what the real problem is, so you will know WHAT to order, all your questions are meaningless
until YOU tare it down and see what the real problem is, so you will know WHAT to order, all your questions are meaningless
#9
Lead Lap
Thread Starter
knockoff the 77 that is someone trying to use the OEM number and adding their 77 on the end so Lexus cant sue them.... for using their numbers. why do you want a chinese part instead of japan??
until YOU tare it down and see what the real problem is, so you will know WHAT to order, all your questions are meaningless
until YOU tare it down and see what the real problem is, so you will know WHAT to order, all your questions are meaningless
I will deffinatly be getting japanese parts though.
and I guess i did'nt accept until now that my car would be out of comission for a few days, hence the questions.
Thanks for all the help.
Ill post in this thread again beforehand if I end up tackling this myself
#11
Lead Lap
Thread Starter
Well I had a firestone(where I know and trust the employees) replace my bearing.
50 for a oem nsk bearing on amazon.
labor was $350 to do everything.
my wheel speed sensor was damaged and couldnt be removed, so it was broken when they took everything off..
They discounted me the price of the sensor on the labor($130) and will install it for free if I get one.
So I only paid $220.
Glad I have a 95 and this only gives me dashboard lights not serious problems
50 for a oem nsk bearing on amazon.
labor was $350 to do everything.
my wheel speed sensor was damaged and couldnt be removed, so it was broken when they took everything off..
They discounted me the price of the sensor on the labor($130) and will install it for free if I get one.
So I only paid $220.
Glad I have a 95 and this only gives me dashboard lights not serious problems
#12
Well I had a firestone(where I know and trust the employees) replace my bearing.
50 for a oem nsk bearing on amazon.
labor was $350 to do everything.
my wheel speed sensor was damaged and couldnt be removed, so it was broken when they took everything off..
They discounted me the price of the sensor on the labor($130) and will install it for free if I get one.
So I only paid $220.
Glad I have a 95 and this only gives me dashboard lights not serious problems
50 for a oem nsk bearing on amazon.
labor was $350 to do everything.
my wheel speed sensor was damaged and couldnt be removed, so it was broken when they took everything off..
They discounted me the price of the sensor on the labor($130) and will install it for free if I get one.
So I only paid $220.
Glad I have a 95 and this only gives me dashboard lights not serious problems
#13
Lead Lap
Thread Starter
I wasnt able to find my order to show you the exact one that I ordered. I ordered the OEM one which was made by NSK, but this should be a good alternative.
Last edited by SpencerT; 08-20-12 at 02:15 PM.
#14
i found bearings for my 92 ls400 at auto zone for about 100 but to find out i spun a bearing on the hub now i had to get a whole assembly,dealer wanted $800 for the assembly so i said 4get that and went to a junkyard and found a lexus that enterchanged with my 92 and got the intire hub assembly for $90 and the bearing was still good so i returnd the bearing i got from autozone lol but i was so lucky to find somebody who put the whole thing on for $40!!!!!!!!!!!!