Please help me? 93 pull ECU
09-27-11, 06:34 PM
#1
Pole Position
Thread Starter
Join Date: Sep 2011
Location: FL
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Please help me? 93 pull ECU
yes ive searched. bottom cover no problem pulled right out. i can see the ecu. but i dont see how to pull the glove box to get it out. is that even needed on a 93?
either way can someone help a Newb out here? LOL
i seen two tabs front bottom of the glove box. but did not see any screws? are they down in there?
either way can someone help a Newb out here? LOL
i seen two tabs front bottom of the glove box. but did not see any screws? are they down in there?
Last edited by SkulCracka; 09-27-11 at 06:47 PM.
09-27-11, 07:08 PM
#2
Rookie
Join Date: Aug 2001
Location: HOUSTON
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
There are no screws. Look for push pins and push them. Remove the clips that you pushed in. Remove glove box partition. Take out the 10mm bolts top and bottom of the knee panel and there you have it.
Oh yea, remove the door arms by pushing off the retainers on the glove box door. Be careful in there. There is someone we call Ninja Dash Sharpener who polishes the metal pieces as razor sharp as he can to make sure he cuts the Round Eyes hands!
Oh yea, remove the door arms by pushing off the retainers on the glove box door. Be careful in there. There is someone we call Ninja Dash Sharpener who polishes the metal pieces as razor sharp as he can to make sure he cuts the Round Eyes hands!
Last edited by LEXTEK1; 09-27-11 at 07:26 PM.
09-27-11, 07:25 PM
#4
Pole Position
Thread Starter
Join Date: Sep 2011
Location: FL
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
ah there you are...... thanks bud. ok ya i did see the ones up top too. so the top ones just kinda push in ok. didnt want to break anything and was hard with just a flash light. bottom bolts allready out.
09-28-11, 05:10 PM
#5
Steps
step 1
Take out the glove box (push the pins in the pull them out after all of them is out take out the lights real eazy)
Step 2
Pull off the bottom cover
step 3
Un- strew the the strews right above the glove dept. box (while its open ) and the ones where the bottom cover was the there's your ecu!
step 1
Take out the glove box (push the pins in the pull them out after all of them is out take out the lights real eazy)
Step 2
Pull off the bottom cover
step 3
Un- strew the the strews right above the glove dept. box (while its open ) and the ones where the bottom cover was the there's your ecu!
Trending Topics
09-28-11, 10:09 PM
#8
09-29-11, 06:53 AM
#9
Pole Position
Join Date: Aug 2010
Location: IL
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
09-29-11, 08:05 AM
#10
Pole Position
Thread Starter
Join Date: Sep 2011
Location: FL
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
http://www.mediafire.com/ <<< you could upload to there for free. so anyone could d/l it.
11-29-11, 11:22 AM
#13
Reminder guys:
Stop discussing where to find/download these materials illegally. If you want them badly enough they can probably be found elsewhere, so keep ClubLexus in the clear and don't discuss it here.
Linking to other copyrighted or otherwise unauthorized material copies is not allowed on our site without the express written permission of the owner of the copyrighted materials(s). This specifically includes copies of service manuals and pirated movies.
Thread
Thread Starter
Forum
Replies
Last Post