7Series Wheels Adapters
07-08-11, 07:37 PM
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2011
Location: Florida
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
7Series Wheels Adapters
I recently bought a set of BMW 7 series wheels for my LS400, but have only been able to find 15 mill adapters on ebay to run them. Was curious if anyone knew the specs and where the this guy got his?
07-08-11, 08:54 PM
#3
Welcome to CL...that is a nice LS.
Call this shop up and see:
http://fifteen52.us/shop-2/#ecwid:ca...roduct=1641713
Call this shop up and see:
http://fifteen52.us/shop-2/#ecwid:ca...roduct=1641713
07-08-11, 11:09 PM
#5
Driver School Candidate
Thread Starter
Join Date: Jul 2011
Location: Florida
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Rims are deffff not redrilled, he is running adapters. Im just more so curious as to what size they are because that is the stance im aiming for.
07-10-11, 12:08 AM
#6
Pole Position
iTrader: (5)
Join Date: Aug 2009
Location: WA
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
I think Petis is running -1 and -6 in the rear with adapters on Megans.
I have the same setup on my UCF10 and I'm running -1 F and -7 R. Front pokes too much so I was going to go with a 19mm and have the rear poke a little bit more, so effectively +5 F and -15 in the rear
I have the same setup on my UCF10 and I'm running -1 F and -7 R. Front pokes too much so I was going to go with a 19mm and have the rear poke a little bit more, so effectively +5 F and -15 in the rear
Trending Topics
07-12-11, 05:03 PM
#9
Driver School Candidate
Thread Starter
Join Date: Jul 2011
Location: Florida
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
That is why i posted it in the title, that they were the 7 series wheels. I dont think they changed the widths/offsets unless they did on the newest generation
07-15-11, 10:00 AM
#12
Driver School Candidate
Thread Starter
Join Date: Jul 2011
Location: Florida
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Adapters just ordered, thanks S30ZG!
The lex is just my daily/rollout car, so im keeping it pretty mild. Will end up at +4 front, with a -5 rear. looking for just flush pretty much, with very minimal poke for running pretty minimal stretch and almost factory camber
. Now i just need to locate some nice used coils hopefully ! Dont want to have to dish it out for New ones!
I have been building 240's for years, but this is my first big body i have ever played with. heres a shot or 2 of my s14 long ago when it was on the road.
The lex is just my daily/rollout car, so im keeping it pretty mild. Will end up at +4 front, with a -5 rear. looking for just flush pretty much, with very minimal poke for running pretty minimal stretch and almost factory camber
. Now i just need to locate some nice used coils hopefully ! Dont want to have to dish it out for New ones!I have been building 240's for years, but this is my first big body i have ever played with. heres a shot or 2 of my s14 long ago when it was on the road.
Last edited by Shamwow; 07-15-11 at 10:17 AM.
Thread
Thread Starter
Forum
Replies
Last Post
MNsota
Wheels, Tires & Brakes Forum
0
10-16-11 05:15 PM
