UFC20 interior electronics questions.
#1
Driver School Candidate
Thread Starter
Join Date: May 2011
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
UFC20 interior electronics questions.
Hi I recently purchased a 2nd gen ls400, and I ran into a few problems.
1. The climate and audio control display screens are "burned" and can only be seen at a certain angle / lighting.
2. The power lock only works for the driver side door, though it seems that all other passenger doors' locks seem to nudge a bit, but doesn't fully unlock/lock. Front passenger switch would still lock/unlock driver side, but doesn't do anything to the other doors.
So could the switch motor in individual doors be bad? or could it be a loose wires not making enough contact? If the motor is indeed bad, could a 1st gen motor replace the second gen?
The reason i'm asking was that there is a 1st gen for sale that was wrecked from the front for $400, so I'm just wondering if there would be anything else that's interchangeable between the 1st gen and 2nd gen. Thanks in advance.
1. The climate and audio control display screens are "burned" and can only be seen at a certain angle / lighting.
2. The power lock only works for the driver side door, though it seems that all other passenger doors' locks seem to nudge a bit, but doesn't fully unlock/lock. Front passenger switch would still lock/unlock driver side, but doesn't do anything to the other doors.
So could the switch motor in individual doors be bad? or could it be a loose wires not making enough contact? If the motor is indeed bad, could a 1st gen motor replace the second gen?
The reason i'm asking was that there is a 1st gen for sale that was wrecked from the front for $400, so I'm just wondering if there would be anything else that's interchangeable between the 1st gen and 2nd gen. Thanks in advance.
#4
If you can remove the unit (tutorial available) and solder you can buy a new LCD to replace the blacked out one.
http://shop.ebay.com/i.html?_from=R4...All-Categories
Door lock motors are interchangeable (tutorial available).
http://shop.ebay.com/i.html?_from=R4...All-Categories
Door lock motors are interchangeable (tutorial available).
#5
Driver School Candidate
Thread Starter
Join Date: May 2011
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Sorry it is a 1995 model. And yes I do have all the switches for both driver and passenger door.
And steve, thanks alot for the link. If possible could i get a link for the power lock switch tutorial? Thanks in advance.
And steve, thanks alot for the link. If possible could i get a link for the power lock switch tutorial? Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post