Originally Posted by Dtwillis5
Car running on 4 cylinders thats why it only move in L and R and kills when given gas!
Which 4 cylinders
is it running on, left or right distributor? The drivers side coil (left) is known to go bad on these cars. Pull the coil wire off the distributor, hold the end close to the valve cover, have someone crank the engine and see if there's spark. If you have spark coming from the coil wire then check all the plug wires the same way. If you don't have spark then it's probably the cam position sensor on that side.
I still think it's a timing issue like maybe the belt jumped a tooth. Did you ever check the (3) timing marks? You can see the cam marks in #28 in this http://www.lexls.com/tutorials/engine/timingbelt.html
Did you put the plug wires on correctly? The routing diagram is #23 of this. http://www.lexls.com/tutorials/ignition/sparkplugs.html
You said you changed the rotors in one of your threads, I don't remember which one but, did you put them on right? There has been many guys that put them on 180* off. Hopefully something here will help ya out. Check those timing marks first