Go Back   Club Lexus Forums > Lexus Model Forums > LS Models > LS400
Sign in using an external account
Register Forgot Password?

LS400 Timing Belt replacement

Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old 01-21-11, 09:01 AM   #1
rosieski
Driver School Candidate
Trader Score: (0)
 
Join Date: Jan 2011
Location: California
Posts: 2
Default LS400 Timing Belt replacement

I have a 1998 LS400 with only 65,000 miles on it. Is it ok to wait until I reach 90k or should I replace it due to the years i service?
This ad is not displayed to registered members.
Register your free account today and become a member on Club Lexus!
rosieski is offline   Reply With Quote
Old 01-21-11, 09:26 AM   #2
etex
Driver
Trader Score: (0)
 
Join Date: Apr 2007
Location: Texas
Posts: 180
Default

Assuming you are not a heavy-footed driver, my suggestion would be to let it ride for another 25K miles. You will probably get different opinions on this.
etex is offline   Reply With Quote
Old 01-21-11, 09:58 AM   #3
williamb82
Lead Lap
Trader Score: (0)
 
Join Date: Mar 2010
Location: Florida
Posts: 504
Default

the recommended is 90k. i dont see why that would be a problem unless your hard on the engine. it wont hurt anything changing it now though. i recommend changing all the front seals when you do change it though. now or later.
__________________
black 84 supra, 7mgte, truetrac lsd, bbk, ms2, etc.. 2jzgte swap in progress
blue 85 supra, current beater, trd header, hks exhaust, custom intake, cone filter, etc...
black 86 supra hks tripple weber setup in the works!
93 GS300 daily driver
williamb82 is offline   Reply With Quote
Old 01-21-11, 11:17 AM   #4
rosieski
Driver School Candidate
Trader Score: (0)
 
Join Date: Jan 2011
Location: California
Posts: 2
Default

Thanks for your input!
rosieski is offline   Reply With Quote
Old 01-21-11, 12:12 PM   #5
deanshark
Lexus Champion
Trader Score: (0)
 
Join Date: Dec 2009
Location: ct
Posts: 1,983
Default

90k should be good, some have gone alot more but noone will recomend that b/c it is an interference engine. If the belt does snap, or slip, you WILL have major damage to your engine. As William said, make sure you change the seals. (Cams and crank) I didn't do mine last year when I changed the t-belt and now I'm back in there changing them.
deanshark is offline   Reply With Quote
Old 01-23-11, 05:00 AM   #6
Rollaboy
Lead Lap
Trader Score: (1)
 
Rollaboy's Avatar
 
Join Date: Aug 2009
Location: Copenhagen
Posts: 413
Default

williamb82, what front seals do you mean?

i will change my belt this summer so im listening in on this topic.

and what about bearings, which ones should be changed? i like to repairs myself and get the oem pars online through sewellparts so it would be the best to get everything ready so i dont miss out on anything.
__________________

SC430 2002. In the making http://www.clublexus.com/forums/sc-4...m-denmark.html
- G-Answer front and rear lips. 06' light upgrade. Brembo F50 kit. Work wheels and more.
LS400 1991 VIP (SOLD) http://www.clublexus.com/forums/ls40...-my-ls400.html
- 9x20" 10x20" Weds Kranze Bazreia. BC coils. Supra TT brakes. EBC rotors, RedStuff pads.
Rollaboy is offline   Reply With Quote
Old 01-23-11, 09:08 AM   #7
rob22
Rookie
Trader Score: (0)
 
Join Date: Jun 2008
Location: CA
Posts: 58
Default

There are a couple of idler pulleys and a tensioner that you'll want to replace. Of course you'll want to replace the water pump and there is at least one o-ring in there.

You'll want to work out a plan for breaking the crankshaft bolt loose...if I recall correctly there are 3 approaches: (1) special tool to hold the pulley, (2) bump the starter, (3) jam the flywheel. You should be able to search and find the details on these.

www.lexls.com has great details on this work, I think it's similar to the 98 model....?
__________________
Rob

1997 LS400
1994 LS400 anniversary
rob22 is offline   Reply With Quote
Old 01-24-11, 05:22 AM   #8
williamb82
Lead Lap
Trader Score: (0)
 
Join Date: Mar 2010
Location: Florida
Posts: 504
Default

the crank seal and cam seals. as for the idler pullies, i dont change them unless they feel gritty when turning by hand. if they feel perfectly smooth i leave them. as for the water pump. well, i would pull it off and inspect the impeller. if its fine and the bearings feel good id put it back in without replacing. if the impeller is corroded, or the bearings fell gritty then id install a new one.
__________________
black 84 supra, 7mgte, truetrac lsd, bbk, ms2, etc.. 2jzgte swap in progress
blue 85 supra, current beater, trd header, hks exhaust, custom intake, cone filter, etc...
black 86 supra hks tripple weber setup in the works!
93 GS300 daily driver
williamb82 is offline   Reply With Quote
Old 01-24-11, 09:46 PM   #9
Fullmetal
Driver School Candidate
Trader Score: (0)
 
Join Date: Jan 2011
Location: VA
Posts: 12
Default

keep and eye out for the water pump symptoms. This can cause the belt to wear.

You could also remove the timing belt covers to look at it if you like.
Fullmetal is offline   Reply With Quote
Old 01-25-11, 09:45 PM   #10
sdls
Pole Position
Trader Score: (0)
 
Join Date: Sep 2010
Location: KY
Posts: 221
Default

Quote:
Originally Posted by rosieski View Post
I have a 1998 LS400 with only 65,000 miles on it. Is it ok to wait until I reach 90k or should I replace it due to the years i service?
you can wait a few more years on that. CA weather is easy on timing belts and your miles are pretty darn low. you can go something like 130,000 on these timing belts without worry.
sdls is offline   Reply With Quote
Old 01-25-11, 11:16 PM   #11
PureDrifter
BahHumBug
Trader Score: (10)
 
PureDrifter's Avatar
 
Join Date: Aug 2004
Location: California
Posts: 22,713
PureDrifter
Send a message via AIM to PureDrifter
Default

the belts may last, but the water pump and idler pulley bearings are age sensitive. wouldn't hurt to pull the timing covers and check the belt for both wear and any signs of a failing bearings (ie-wear pattern).
__________________
1. Black on Black 1999 LS400 PM-spec
-Maya-Megan-Magnaflow-LSportline-Xenondepot-PPE Engineering-Duce-Platinum VIP-Figs Engineering-R1Concepts-
2. Black 2001 MR2 Spyder -#muchroadster-
3. Black 2004 IS300 -Manaray-HKS-Eibach-Kumho-
4. Ebony Teal 1995 LS400 11-8-06
PureDrifter is offline   Reply With Quote
Old 01-28-11, 01:08 PM   #12
sethjon
Driver
Trader Score: (0)
 
Join Date: Jan 2011
Location: ca
Posts: 157
Default

Quote:
Originally Posted by etex View Post
Assuming you are not a heavy-footed driver, my suggestion would be to let it ride for another 25K miles. You will probably get different opinions on this.
I agree. 90K is the normal change.
sethjon is offline   Reply With Quote
Old 01-28-11, 01:11 PM   #13
sethjon
Driver
Trader Score: (0)
 
Join Date: Jan 2011
Location: ca
Posts: 157
Default

Thats not actually correct. A timing belt can go at any time and the longer you wait the more at risk you are. Its a crap shoot and if you lose it will cost big bucks.
sethjon is offline   Reply With Quote
Old 01-28-11, 08:13 PM   #14
willhickey
Lexus Test Driver
Trader Score: (1)
 
Join Date: Feb 2009
Location: north caroilina
Posts: 850
Default

just look at the belt , if its not cracking your good... !
willhickey is offline   Reply With Quote
Old 01-28-11, 08:15 PM   #15
willhickey
Lexus Test Driver
Trader Score: (1)
 
Join Date: Feb 2009
Location: north caroilina
Posts: 850
Default

unless if you have the money just laying around id wait if the belt isnt cracked or glazed looking,my 97 camry i didnt change until 150k when its was finally starting to glaze not crack.. it was the original everything. opinions will varie but it really just depends on your financial situation and how it looks , im not looking at it in person so i cant be sure
willhickey is offline   Reply With Quote
Old 01-28-11, 08:15 PM
 
 
 
 
Reply

Tags
1998, 1999, 400, 65000, 97, belt, change, cost, lexus, ls, ls400, miles, replacement, service, symptoms, tensioner, timing

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Brake rotor recommendations for a 1990 LS400? LS400EVO LS400 12 06-01-12 08:00 AM
is there a thread on how to replace a alterntor??? for ls400 92 LS400BOY LS400 29 02-01-11 02:05 PM
When should oxygen sensors be replaced? 1999 LS400,130k miles. haulin79 LS400 3 05-04-10 05:28 AM
Easiest Way to Replace EGR Valve Pipe on 95 LS400?? DroppedGS LS400 3 08-28-06 11:10 AM
How to replace alternator on 90' LS400 chikunih Maintenance 3 03-18-05 12:52 PM

All times are GMT -7. The time now is 07:11 PM.

Join ClubLexus
Advertising


Copyright © 2000-2008 Internet Brands, Inc. All Rights Reserved
Privacy Policy | Disclaimer | Terms of Use | JOBS


Get all contact info