No Spark
03-17-10, 05:11 PM
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: MD
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
No Spark
Hey Guys,
I just replaced the waterpump and timing belt in my ls400. After, make sure everything is lined up correctly. I put her back together and now I'm not getting a spark. She has gas in her but when a try to turn her over it sounds like there is no gas. I checked the distributor rotors, sparkplugs and the battery, Any suggestion place help?
I just replaced the waterpump and timing belt in my ls400. After, make sure everything is lined up correctly. I put her back together and now I'm not getting a spark. She has gas in her but when a try to turn her over it sounds like there is no gas. I checked the distributor rotors, sparkplugs and the battery, Any suggestion place help?
03-17-10, 06:05 PM
#2
Driver
iTrader: (1)
Join Date: Feb 2010
Location: WA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Hey Guys,
I just replaced the waterpump and timing belt in my ls400. After, make sure everything is lined up correctly. I put her back together and now I'm not getting a spark. She has gas in her but when a try to turn her over it sounds like there is no gas. I checked the distributor rotors, sparkplugs and the battery, Any suggestion place help?
I just replaced the waterpump and timing belt in my ls400. After, make sure everything is lined up correctly. I put her back together and now I'm not getting a spark. She has gas in her but when a try to turn her over it sounds like there is no gas. I checked the distributor rotors, sparkplugs and the battery, Any suggestion place help?
I'd start with the pass side coil... there should be the spark plug wire and the little electrical connector into the back of it...
Have you pulled a plug and tested to see if you are getting spark?
Thread
Thread Starter
Forum
Replies
Last Post
peterls
LS - 1st and 2nd Gen (1990-2000)
4
11-17-13 06:48 PM
One HoT
SC- 1st Gen (1992-2000)
5
06-26-03 08:04 AM
