aftermarket alarms
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2006
Location: TEXAS
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
aftermarket alarms
I bought a 94 ls400 and the only key o got was the service key. I want to get the alarm working and I am concerned about getting an aftermarket alarm with the existing Lexus alarm installed. Please help?!
#2
Driver School Candidate
Join Date: Sep 2006
Location: MO
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
I've been installing professionally for awhile now and I have a 94 LS400. You can integrate an aftermarket quite easily into this car. Hell I even wired in the gas door pop lol. If you need any help in wiring post up!
#4
can you help me out on this...I have a after market and the stock alram hook up...what do i have 2 do to bypass my stock alarm? I have a ucf 10
#5
Driver School Candidate
Join Date: Sep 2006
Location: MO
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Well usually aftermarket equipment is not meant to bypass so much as it is integrate if you're using the factory wiring. The lock wire is Green/Yellow and the lock wire is Green, both are negative triggers which means they go to 0v when active or pressed. Now when the right lock wire is tapped the factory alarm and the aftermarket alarm are both active, and when the correct unlock wire is tapped then the factory alarm and the aftermarket alarm are both deactivated. ALWAYS USE A MULTIMETER NO TEST LIGHTS PLEASE!!!
Thread
Thread Starter
Forum
Replies
Last Post
dumdumgreg
SC- 1st Gen (1992-2000)
4
04-22-09 12:36 AM