Go Back   Club Lexus Forums > Lexus Model Forums > LS Models > LS400
Sign in using an external account
Register Forgot Password?

My car wont reach the normal operating temperature.

Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old 03-29-08, 08:44 AM   #1
Och
Lexus Fanatic
Trader Score: (3)
 
Och's Avatar
 
Join Date: Feb 2003
Location: NY
Posts: 10,688
Send a message via AIM to Och
Default My car wont reach the normal operating temperature.

I am so frustrated I'm ready to drive this car off a cliff. Ever since I've replaced the water pump, The car wont reach the normal operating temperature. The temperature stays just a notch about the first line. I though my thermostat might have been deffective, so I just replaced it, and still the same thing.

Any ideas?
This ad is not displayed to registered members.
Register your free account today and become a member on Club Lexus!
Och is offline   Reply With Quote
Old 03-29-08, 11:17 AM   #2
tbilisi79
Lead Lap
Trader Score: (0)
 
tbilisi79's Avatar
 
Join Date: Nov 2006
Location: NY
Posts: 640
Default

Does the heat work?
You should check the temperature at the thermostat housing using the laser reader. Could be your temp sensor.
tbilisi79 is offline   Reply With Quote
Old 03-29-08, 11:29 AM   #3
Och
Lexus Fanatic
Trader Score: (3)
 
Och's Avatar
 
Join Date: Feb 2003
Location: NY
Posts: 10,688
Send a message via AIM to Och
Default

Hey. The heat works. But even without testing the temperature with laser reader, I know its not reaching the point it needs to be at. I can open up the radiator cap at any time, not mater how long the car was running, and it doesn't do the "psss" that its suposed to do. Also, the coolant inside the reservoir isn't even warm.
Och is offline   Reply With Quote
Old 03-29-08, 12:46 PM   #4
Rocan
Pole Position
Trader Score: (0)
 
Join Date: Mar 2008
Location: New York
Posts: 279
Default

its running cooler, which is usually better. i don't see the problem here...
Rocan is offline   Reply With Quote
Old 03-29-08, 12:49 PM   #5
PureDrifter
BahHumBug
Trader Score: (10)
 
PureDrifter's Avatar
 
Join Date: Aug 2004
Location: California
Posts: 22,713
PureDrifter
Send a message via AIM to PureDrifter
Default

that means u have a leak somewhere.

or its possible u have an air bubble in the lines.

when u filled the coolant, you did have the heater set to max hot and then let the engine run with the rad. cap off right?
__________________
1. Black on Black 1999 LS400 PM-spec
-Maya-Megan-Magnaflow-LSportline-Xenondepot-PPE Engineering-Duce-Platinum VIP-Figs Engineering-R1Concepts-
2. Black 2001 MR2 Spyder -#muchroadster-
3. Black 2004 IS300 -Manaray-HKS-Eibach-Kumho-
4. Ebony Teal 1995 LS400 11-8-06
PureDrifter is offline   Reply With Quote
Old 03-29-08, 12:50 PM   #6
Rocan
Pole Position
Trader Score: (0)
 
Join Date: Mar 2008
Location: New York
Posts: 279
Default

Quote:
Originally Posted by PureDrifter View Post
that means u have a leak somewhere.

or its possible u have an air bubble in the lines.

when u filled the coolant, you did have the heater set to max hot and then let the engine run with the rad. cap off right?
i was thinking a leak, but wouldn't having a leak mean that its running hotter then normal?
Rocan is offline   Reply With Quote
Old 03-29-08, 12:53 PM   #7
Neofate
Lexus Test Driver
Trader Score: (1)
 
Neofate's Avatar
 
Join Date: Feb 2008
Location: Alabama
Posts: 1,062
Default

Well a leak also can lower pressure. Pressure = more heat.

You sure your Rad. Cap is still providing the proper Psi?
__________________
____________________________
-::|1994 [LS 400] - CL Folding Team Member: NeofateCL|::-
_:[|6-Ghz and, 3-CPU's, Dedicated For CL Folding Team|]:_
Neofate is offline   Reply With Quote
Old 03-29-08, 01:05 PM   #8
PureDrifter
BahHumBug
Trader Score: (10)
 
PureDrifter's Avatar
 
Join Date: Aug 2004
Location: California
Posts: 22,713
PureDrifter
Send a message via AIM to PureDrifter
Default

not when unless ur running the motor for long periods of time while standing still.

sounds basically like the car doesnt have enough coolant, either due to a leak which is preventing pressure to build up, or the thermostat and heater valves werent open allowing air in and not filling up completely with coolant.
__________________
1. Black on Black 1999 LS400 PM-spec
-Maya-Megan-Magnaflow-LSportline-Xenondepot-PPE Engineering-Duce-Platinum VIP-Figs Engineering-R1Concepts-
2. Black 2001 MR2 Spyder -#muchroadster-
3. Black 2004 IS300 -Manaray-HKS-Eibach-Kumho-
4. Ebony Teal 1995 LS400 11-8-06
PureDrifter is offline   Reply With Quote
Old 03-29-08, 05:06 PM   #9
Och
Lexus Fanatic
Trader Score: (3)
 
Och's Avatar
 
Join Date: Feb 2003
Location: NY
Posts: 10,688
Send a message via AIM to Och
Default

Hey guys... Ran it with cap and inlet housing open, with heat full blast. I don't understand whats happening. I don't see any antifreeze leaks, so I assume the pressure builds up. Although when I open the cap, it doesn't seem to release any pressure.
Och is offline   Reply With Quote
Old 03-29-08, 11:41 PM   #10
GRAND_LS 4
3UZ-FEEEE
Trader Score: (2)
 
GRAND_LS 4's Avatar
 
Join Date: May 2004
Location: Northern VA
Posts: 6,176
Send a message via AIM to GRAND_LS 4
Default

Quote:
Originally Posted by Och View Post
Hey guys... Ran it with cap and inlet housing open, with heat full blast. I don't understand whats happening. I don't see any antifreeze leaks, so I assume the pressure builds up. Although when I open the cap, it doesn't seem to release any pressure.
You might have a bubble in the system. Those are the common signs.
__________________
http://img170.imageshack.us/img170/5469/grandblur1jx5.jpg
'02 GS430 NAV/ML Millennium Silver/Ash
'14 GX460 Sparkle Solid Gray Mica Metallic/Saddle
GRAND_LS 4 is offline   Reply With Quote
Old 03-30-08, 06:28 AM   #11
Och
Lexus Fanatic
Trader Score: (3)
 
Och's Avatar
 
Join Date: Feb 2003
Location: NY
Posts: 10,688
Send a message via AIM to Och
Default

So whats my best way to get rid of the bubble? I've ran the car with radiator cap open for a long time.
Och is offline   Reply With Quote
Old 03-30-08, 07:34 AM   #12
Rocan
Pole Position
Trader Score: (0)
 
Join Date: Mar 2008
Location: New York
Posts: 279
Default

Quote:
Originally Posted by Och View Post
So whats my best way to get rid of the bubble? I've ran the car with radiator cap open for a long time.
flush the system???
Rocan is offline   Reply With Quote
Old 03-30-08, 12:26 PM   #13
PureDrifter
BahHumBug
Trader Score: (10)
 
PureDrifter's Avatar
 
Join Date: Aug 2004
Location: California
Posts: 22,713
PureDrifter
Send a message via AIM to PureDrifter
Default

search the maint. forum, i recal a guy saying something about jacking up the front of the car as high as u can so the radiator is the highest point in the cooling system, then running it with the cap open so the air bubble will float to it.
__________________
1. Black on Black 1999 LS400 PM-spec
-Maya-Megan-Magnaflow-LSportline-Xenondepot-PPE Engineering-Duce-Platinum VIP-Figs Engineering-R1Concepts-
2. Black 2001 MR2 Spyder -#muchroadster-
3. Black 2004 IS300 -Manaray-HKS-Eibach-Kumho-
4. Ebony Teal 1995 LS400 11-8-06
PureDrifter is offline   Reply With Quote
Old 03-30-08, 01:51 PM   #14
Neofate
Lexus Test Driver
Trader Score: (1)
 
Neofate's Avatar
 
Join Date: Feb 2008
Location: Alabama
Posts: 1,062
Default

Makes sense.. logical.

Though it should still go to full pressure even with an air bubble. But we aren't accurately measuring system pressure , we are just going by a 'sound' when the cap comes off =)

If it were me.. I would jack the car up -- I would flush the entire system.. I would put a hose to the inlet.. and put a bit of pressure in it. Nothing damaging.. just enough to get something running through -- Starting the car with 'just' water for a short period. Water alone wont' hurt it,.. (for short periods of time) -- IE: Don't let it warm all the way up. Also I wouldn't trust the temp gauge, so a minute or two at max here.

Refill,.. check all hoses,.. fittings,.. pump -- keep cap off.. and monitor temp -- get a temp meter,.. measure the fluid in the radiator ,.. see what its getting at. (how high)
__________________
____________________________
-::|1994 [LS 400] - CL Folding Team Member: NeofateCL|::-
_:[|6-Ghz and, 3-CPU's, Dedicated For CL Folding Team|]:_
Neofate is offline   Reply With Quote
Old 03-30-08, 02:07 PM   #15
PureDrifter
BahHumBug
Trader Score: (10)
 
PureDrifter's Avatar
 
Join Date: Aug 2004
Location: California
Posts: 22,713
PureDrifter
Send a message via AIM to PureDrifter
Default

it wont pressurize properly since the air bubble can compress, water, and pretty much every other room temp. liquid for all practical purposes does not compress.
__________________
1. Black on Black 1999 LS400 PM-spec
-Maya-Megan-Magnaflow-LSportline-Xenondepot-PPE Engineering-Duce-Platinum VIP-Figs Engineering-R1Concepts-
2. Black 2001 MR2 Spyder -#muchroadster-
3. Black 2004 IS300 -Manaray-HKS-Eibach-Kumho-
4. Ebony Teal 1995 LS400 11-8-06
PureDrifter is offline   Reply With Quote
Old 03-30-08, 02:07 PM
 
 
 
 
Reply

Tags
car, gauge, low, normal, open, operating, overheating, reach, rx300, sc400, sender, stuck, temp, temperature, thermostat, warmed, wont

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Car shuts off at operating temperature Beef356 GS - Second Generation 19 10-12-14 01:20 PM
Car won't reverse 2ndgen400 GS - Second Generation 2 10-08-14 07:50 PM
DIY Repairing Air Mix Servomotors fingershop GS - Second Generation 71 05-13-14 01:00 PM
I NEED HELP! Car stalls after warm up............. puff Performance 5 04-13-11 10:03 PM
If normal, where does your temperature gauge needle read? haulin79 LS400 28 04-26-10 12:07 PM

All times are GMT -7. The time now is 03:38 AM.

Join ClubLexus
Advertising


Copyright © 2000-2008 Internet Brands, Inc. All Rights Reserved
Privacy Policy | Disclaimer | Terms of Use | JOBS


Get all contact info