When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
After fridays BC coil-install..
Needs to go up a bit in the front, then get it aligned so i can measure and order spacers for my drift condition-GS430 17´s.
Or mebbe i should just go ahead and order 25mm front and rear?
Turned out aint nobody had time to wait so i orderd 25mm spacers yesterday, got the delivery today and just finished mounting everything (with a serious cold).
Sry for the crappy pic, i have a crappy phone.
Turned out aint nobody had time to wait so i orderd 25mm spacers yesterday, got the delivery today and just finished mounting everything (with a serious cold).
Sry for the crappy pic, i have a crappy phone.
Front looks good. Rear looks like it isnt sitting flush. May be just the picture. I see you got the 1" spacers. Maybe 1 1/2" (38mm) in the rear would do it.
Front looks good. Rear looks like it isnt sitting flush. May be just the picture. I see you got the 1" spacers. Maybe 1 1/2" (38mm) in the rear would do it.
It isnt quite flush
And its gonna get more unflush once i get some camber front and rear.
From what ive read to much offset will harm handling and the plan is to go sideways so i figured 25mm just to clear the breaks, and make it a bit more flush.
09-03-14, 01:37 PM
and just finished mounting everything (with a serious cold).
Boostted
