Seized pulley -- need replacement pn
#1
Driver
Thread Starter
Join Date: Oct 2004
Location: South Carolina
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Seized pulley -- need replacement pn
My father's LS400 has eaten a serpentine belt due to one of the pulley's seizing up. It's the one right above the water pump, a groved pully that doesn't seem to serve any function other than for belt routing (just a threaded bolt holding it on). The bearings on it are toast, so the belt just shredded against it right as he pulled in the driveway.
Can anyone get me a PN for replacement? Or, does this pully also exist on any of the 2JZ motors? If so I'll yank one off my spares.
Thanks!
Can anyone get me a PN for replacement? Or, does this pully also exist on any of the 2JZ motors? If so I'll yank one off my spares.
Thanks!
#4
http://www.trademotion.com/partlocat...model=LS%20400
just type in pully in the search its called "serpentine idler pulley"
top one for 55
mine went bad along with my fan bracket back in early november. Only mech problem my car has ever had
just type in pully in the search its called "serpentine idler pulley"
top one for 55
mine went bad along with my fan bracket back in early november. Only mech problem my car has ever had
#6
Pole Position
iTrader: (3)
you can replace just the bearing in the pulley you are describing, i posted the bearing size in this thread:
https://www.clublexus.com/forums/sho...d.php?t=269851
https://www.clublexus.com/forums/sho...d.php?t=269851
Thread
Thread Starter
Forum
Replies
Last Post
smrtsmart
LS - 1st and 2nd Gen (1990-2000)
9
02-12-13 10:26 AM