LS400 out Door Handle Replacement guide?
#1
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
LS400 out Door Handle Replacement guide?
I need to replace the outer drivers side door handle on a 1995 Lexus LS400. Does anyone have a guide, service manual link, or tutorial I can use to learn how to do this?
#5
Lexus Test Driver
I have a couple tutorials on this. They're for a first gen but the concepts are almost the same: http://www.lexls.com/tutorials/body/
#6
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
I have a couple tutorials on this. They're for a first gen but the concepts are almost the same: http://www.lexls.com/tutorials/body/
http://www.lexls.com/tutorials/body/fdoorhandle.html
There is a much smaller hole and plastic in it that I cannot remove. If I can remove this white/clear plastic, that has a rod going through it for the inner door handle, I can remove the two screws in your STEP 1. Anyone know how to get to those screws or remove this plastic?
#7
Lexus Test Driver
Mine had clear plastic too, just pull it off so you can see what you have to work with. If your 95 doesn't have the top access hole the first gens do your job is going to be more difficult. Maybe post a pic showing what you have.
Trending Topics
#8
Lexus Test Driver
Did anyone ever find a resolution for 1995-1997 LS400's? I have a friend with a 1997 LS400 that needs me to replace his outer door handle but I'm wondering about the issue dejacky experienced.
#10
Lexus Test Driver
Thank you very much. Do you think you'd be able to have it done before Sunday? If not, I can do it some other time, but I was hoping to be able to do it on Sunday while there is light outside.
#14
Driver School Candidate
Join Date: Jul 2013
Location: or
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi, working to replace the outside driver handle on my 1996 LS 400. Pulled the door panel off and getting the old handle off is proving to be very difficult and not intuitive at all. Any help would be wonderful.
Thank you
Liz
Thank you
Liz