Altec914

I have a 98 LS400 and it sways a lot on turns. Should I replace it with a original one or are there better ones out there and if there is where is the best place to buy. The car just turned 100k miles.

THANKS

LiCelsior

iTrader: (32)

u might wanna read the sticky that PureDrifter made, he knows alot about the 2nd gen LS and it should where to buy performance mods.

sonyman

The cheapest thing to do to reduce body roll would be to simply install some polyurethane anti-sway bar bushings. The stock ones are rubber and as such can flex and stretch during cornering. Daizen makes quality polyurethane bushings that are listed on their site at http://www.daizensporttuning.com/pro..._bushings.html. As far as installation is concerned, there is an excellent tutorial available at http://www.lexls.com/tutorials/suspe...enswaykit.html. Although it's for a 1st generation LS400, it should be similar enough to help you with the installation process on your 2.5 gen.

PureDrifter

iTrader: (10)

try lowering it first buddy

steveski

Don't forget Energy Suspension poly bushings also that have the grease fitting

RA40

iTrader: (6)

Probably lots of worn-wearing suspension parts. Mine certainly is at 119K.
Good technique is important also...