Alittle aftermarket radio install help please.
#1
Driver
Thread Starter
Join Date: Nov 2001
Location: Feasterville, PA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Alittle aftermarket radio install help please.
Hey guys, I just installed an aftermarket MP3 player in my '92 LS400. Everything went pretty smooth for the most part. Actually, there are 2 things that I need help with. First off, Anyone know what the deal is with the power antenna? I was using a schematic I found on these forums awhile back and everything was right on the money as far as the power/acc/ground/speakers went. But when I hooked up the power antenna lead, I don't get anything when I turn the unit on or off. I metered the lead and it seems right. But nothing. Any ideas on why that would be?
Number 2, right now I have the sub completely disconnected. I just spliced into the power and speaker wires since this was on a bottom line no amp Pioneer unit. But the sub has me slightly confused. The stereo I bought has a sub out on there, so I was hoping there would be an easy way of converting it to work with the rca outs on the radio.
Any help at all would be greatly appreciated.
Thanks
Number 2, right now I have the sub completely disconnected. I just spliced into the power and speaker wires since this was on a bottom line no amp Pioneer unit. But the sub has me slightly confused. The stereo I bought has a sub out on there, so I was hoping there would be an easy way of converting it to work with the rca outs on the radio.
Any help at all would be greatly appreciated.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
ric4044
Performance & Maintenance
11
12-09-16 09:55 PM
ShiftyD2k
GS - 2nd Gen (1998-2005)
2
04-06-15 02:23 PM
west709
LS - 1st and 2nd Gen (1990-2000)
9
04-05-12 12:33 AM