turbosix

i have come across a very nice deal with a set that is basically local. no tires so that sucks but i can manage for the price.

id rather not end up having to put these back up on CL or ebay if they dont fit though....

thanks in advance.

pito

Wish I had a clear answer for ya. Did you try a full search?

What is the bolt pattern, offset, rim width?

turbosix

i searched for IS350 in this forum and the only posts were mine


18x8 45mm
18x8.5 50mm

5x4.5 ( 5x114.3 )

turbosix

a friend did a quick chop. i think the tires are a little too thin maybe... but i think i'd be satisfied with this.

chrispy

iTrader: (21)

:wavey: herpes

Looks good, I say do it.

Lexiss_sc430

iTrader: (2)

they will fit on ur 1st gen with out any problems....


these rims would need spacers to clear 95+ LS's because they have the 4 pot brakes,


The profile of the tire will be much thinner than what your use to on ur stockers but thats what you get when you upgrade to bigger wheels.

turbosix

you really think the BBK wouldnt clear? everyone says the new IS have pretty huge calipers....

Lexiss_sc430

iTrader: (2)

I spent a lotta time looking at the 350's calipers when we were at the dealership buying 2 IS's for my cousins... it took them about 5 hours to close a deal for both cars.. we were there for the whole day...

anyway while looking at the 350's brakes the face (distance from rotor to side of caliper) seemed to be less then my LS400 brakes I had on my SC... The LS brakes look bulkier, if you do hit it will only be by 1-3mm it shouldn't be anymore. so the thinnest spacer you find will be enough.
I was just saying it to be on the safe side since I have personally seen it done on a 2nd or 3rd gen....

PureDrifter

iTrader: (10)

1LS will def fit
2LS MAY fit but id need a 2IS owner willing to meet me and lemme test fit

vsynergy

I've seen it on a 2nd gen. Looks alright, it'd look worse on the 1st gen. I think LS430 five spokes are the way to go.