LS 400 - Tranny jerk '91
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2007
Location: California
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
LS 400 - Tranny jerk '91
hey, i have a 1991 ls400 i got about 150k miles on it i love it and i hope to give it another 150k, lately when i put it into gear the car has a really nasty jerk, it feels like someone hits me from the back everytime i put it into drive, if anybody has any ideas what it can really be please let me know. Thankss
#6
Driver School Candidate
Thread Starter
Join Date: Jan 2007
Location: California
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
ok thank you, ill keep all that in mind if you guys get any further info please let me know, because i really dont want to get my tranny rebuilt.
#7
Driver School Candidate
Join Date: Apr 2002
Location: OK
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
OK I've done lots of searching, sounds like it is fairly easy to put a jack under the tranny and replace the mount. My question is where do I place the jack? Is the pan sturdy enough to support the tranny?
My 96 also slams into gear -- especially when it is on fast idle. I really hope this helps.
My 96 also slams into gear -- especially when it is on fast idle. I really hope this helps.
Last edited by justincook; 01-13-07 at 11:18 AM.
Trending Topics
#8
Driver School Candidate
Join Date: Jan 2007
Location: cl
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
jack the car up with a trolley jack then use Axel stands for safety reason then yes use a standard jack to raid the gearbox ( not on the pan though ) jack it from the rear of the gearbox where the prop shaft goes in
Thread
Thread Starter
Forum
Replies
Last Post