Tanabe DF210 springs discussions (The Mother thread)
#106
Where can these LSportline shocks be found and how are they exactly different from the Bilstein HD shocks?
I am looking for a 1-2" drop, 2" max if anything.
I was thinking of going Bilstein HD/Eibach or Bilstein HD/H&R. Opinions?
I am looking for a 1-2" drop, 2" max if anything.
I was thinking of going Bilstein HD/Eibach or Bilstein HD/H&R. Opinions?
#107
BahHumBug
iTrader: (10)
the LSportline shocks are differently valved and have 4 perch settings compared to the normal HD's 2. also, the LSportline versions are made to be used at lower ride heights.
they have been discontinued for more than 2 years now LSportline is no more and Bilstein no longer makes the shocks ot their spec.
for 2" tops i think a bilstein HD/tanabe combo is ur best bet.
they have been discontinued for more than 2 years now LSportline is no more and Bilstein no longer makes the shocks ot their spec.
for 2" tops i think a bilstein HD/tanabe combo is ur best bet.
#108
I'm pretty sure I'm going with the Bilstein HD's no matter what.
Now the question is what springs... Eibach/Tanabe/H&R....choices choices.
I'm aiming to maintain driveability and reliability with a mild drop.
Now the question is what springs... Eibach/Tanabe/H&R....choices choices.
I'm aiming to maintain driveability and reliability with a mild drop.
#109
right now, eibach and oem shocks
this weekend maybe, tanabe and bilstein if the shocks come in tomorrow
tanabe df210 for sure... if not, i can sell my eibach sportlines to you =D
#113
Tokico or KYB w/ Tanabe DF210! UCF10
Hello guys, looking for opinions on this before I make the jump.
First Gen, First Gen! lol
Should I get Tokico HP struts/shocks to go with the Tanabe DF210 springs I will be getting or should I go with the KYB GR-2 struts/shocks? Looking to get a fast reply on this.
Sincerely,
Alexander JW De Santis
First Gen, First Gen! lol
Should I get Tokico HP struts/shocks to go with the Tanabe DF210 springs I will be getting or should I go with the KYB GR-2 struts/shocks? Looking to get a fast reply on this.
Sincerely,
Alexander JW De Santis
Last edited by NJ240sxMan; 03-31-07 at 04:38 PM.
#120
Lead Lap
iTrader: (5)
How firm are the Tanabe's? If they are really firm, I may go for kyb's. However I did enjoy tokico hp's and Illumina's on the accord coupes that I owned. I imagen that the ls 400 is a very heavy car and tokico should stiffen it up. I have 20x8.5 so I may need something stiff as I noticed there is not much room for play under the front wheel wells especially with the main wiring harness and metal framing so close. Hmmmm