Lexkost

persian451 and I will be doing some mods on his 91LS,I will then be able to get some measurments off of his car for the bushings, so I will keep you all informed.

Pagong

i want a set...where do I sign up?

persian451

dude how old are you, you sound like a kid begging for candy

its all good

retrodrive

Guys, see if you can fit a '94 tie bar on there. I can probably get you one from local junk yard for testing putposes. Why is it so important? Tom's has a whole set of aftermarket tiebars that would fit 94+ LS but not the lower years.

Lexkost

retro, Get the bar from a junkyard and we can get it to work.

LeXuSrAcIn

I want the washers too as well as the bushings, but you havent PMed me back yet.

Lvangundy

RETRO -

1994 Celsior would be the 1995-1997 models here.

Different suspension on those models.

retrodrive

I just picked up a '95 sway bar from junk yard. Peter, let me know when you are going to see Mike!

Lexkost

Retro,Did you get the end links with the bar and is it thicker than the first gen?

retrodrive

no, I did not get the end links but I can pick them up tomorrow if we need them. I can't tell you if it is thicker or not, I don't have my car.

persian451

i'm probably going next sat... 5/22

Lexkost

I don't think you will need the endlinks, but if they are free get them.

Lexkost

Install for bushings on my 96LS the swaybar dia. is 1 1/16 and there is a mod needed to fit the new bushing on, notice the length.

Lexkost

The new bushing mount must be bent both ends up a 1/2" to fit frame of car:
And then you can install back on car withstock bolts and a 5/16 flat washers.

Note remove and install this with car on ground and wheel turned to get access from in front of the wheel.

Lexkost

This is a pic of inside of the old bushing note the crack and shiney spots ..........This is the bushing that make the creaking sound on all LS cars once you install these new bushings and grease them it will be gone!