Aftermarket Shiftknob for the UCF10/11
#3
Search Function Inc.
#6
I definitely need one of those..........
I got into a fight with my girlfriend and i got so mad i punch my shifter...........now my shifter is in two pieces
More info on this anyone???
I got into a fight with my girlfriend and i got so mad i punch my shifter...........now my shifter is in two pieces
More info on this anyone???
#7
Lexus Champion
Thread Starter
Join Date: Dec 2002
Location: - Japan -
Posts: 1,750
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by retrodrive
I don't like the look personally but different strokes...ya know.
I don't like the look personally but different strokes...ya know.
I got to look at it up close........ the black wood one looks good. Maybe not the best looking but its one of the better of the 20 or so kinds they make. They didnt have any for my car but i did notice it said Celsior.
The OEM shiftknobs are not that great looking either thats why Im looking for something diffrent.
Trending Topics
#9
Lexus Champion
Originally posted by Lonely Toothbrush
I definitely need one of those..........
I got into a fight with my girlfriend and i got so mad i punch my shifter...........now my shifter is in two pieces
More info on this anyone???
I definitely need one of those..........
I got into a fight with my girlfriend and i got so mad i punch my shifter...........now my shifter is in two pieces
More info on this anyone???
#10
Lexus Test Driver
ok, I called Napolex today, and they said for the 1st gen LS, some people said it fit, and some said it didnt. I'm thinking about either get the black or the wood
wood
wood
#11
Lexus Champion
Thread Starter
Join Date: Dec 2002
Location: - Japan -
Posts: 1,750
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by persian451
ok, I called Napolex today, and they said for the 1st gen LS, some people said it fit, and some said it didnt.
ok, I called Napolex today, and they said for the 1st gen LS, some people said it fit, and some said it didnt.
#12
Lexus Test Driver
now do these have problems with the gears locking? I heard from the SC guys that the **** doesnt lock on to D (drive) and can be easily tapped into Reverse... also, they mentioned that the **** was plastic and painted chrome, poorly made, this true?
#13
Im currently fiberglassing my shift ****. started as an improvement project, but now im mounting a 1.8" lcd monitor in it. I dunno I just didnt like the way mine looked and the aftermarket ones didnt appeal to me. But these dont look to bad actually .
#14
O.C. Lucky Strike Fanatic
iTrader: (1)
Join Date: Dec 2002
Location: So.Cal.
Posts: 8,675
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Lonely Toothbrush
I definitely need one of those..........
I got into a fight with my girlfriend and i got so mad i punch my shifter...........now my shifter is in two pieces
More info on this anyone???
I definitely need one of those..........
I got into a fight with my girlfriend and i got so mad i punch my shifter...........now my shifter is in two pieces
More info on this anyone???
#15
90 LS400
They won't fit a '90 because the **** shafts are round and the 90 LS shaft is a large oval. I assume all first gens have ovals but not sure. I put a new **** on mine but had to take an angle grinder to it and cut down the middle of the shaft about an inch. Made a big mess. You can see where I'm pointing where the cut was made. If it comes out of gear or slips into reverse it's because the button isn't set right. I found a spring that was the right size to make mine work. While I was at it I took out the shift plate and installed a shift boot. I like it much better. I also removed the brake solenoid to let me shift into neutral without my foot on the gas. Not for everyone but it's what I'm used to. The shifter in that car was the ugliest part besides the front grill and the only thing making look old. This is a $45 ichiban (sp?). I wired my overdrive to always be on. I may put a switch on it in the future but don't forsee ever needing it off.
Last edited by kamtra; 05-06-04 at 11:25 AM.