2 PC Lexus Logo Ghost Shadow Light
#16
Lead Lap
#17
Lexus Test Driver
I'm interested to get Chris' feedback on this as well as Oilver Ent., as mine didn't have any rattle at all.
The set I ordered were solid pieces with nothing loose within them.
The set I ordered were solid pieces with nothing loose within them.
#18
Lead Lap
Mine have lenses in them that are the culprit of the rattle. I haven't seen any that look different that plug directly in like the OEM lights.
#19
Lexus Fanatic
Mine were one piece and had zero rattle. They still don't after 60k miles and two+ years of use.
#23
Pole Position
Looks like I am the odd man out but I don't care for this mod. I recently had a Ford Mustang as a rental car and it had this option and I was embarrassed to unlock the car at night. People do seem to love this though- it drew a lot of compliments from valet guys, other folks, etc. Just not my thing at all. I noticed Lincoln is doing it as well (no surprise given the Ford relationship). For me I just don't like anything that does too much promoting of a brand (clothing with big logos, too many logos, etc) so it's no surprise that I don't like this. I would be the type to remove all badges from a car. To each his own!
#24
Looks like I am the odd man out but I don't care for this mod. I recently had a Ford Mustang as a rental car and it had this option and I was embarrassed to unlock the car at night. People do seem to love this though- it drew a lot of compliments from valet guys, other folks, etc. Just not my thing at all. I noticed Lincoln is doing it as well (no surprise given the Ford relationship). For me I just don't like anything that does too much promoting of a brand (clothing with big logos, too many logos, etc) so it's no surprise that I don't like this. I would be the type to remove all badges from a car. To each his own!
#26
To promote Lexus IS fine. I don't like some independent dealer print their big company logo(like ABC auto) on the back or on the back tint window of my car. It make my car looks like dealer's shuttle bus.
#28
I had these logo lights on the front doors, but didn't like the attention... so I opted to install these instead. Very bright!
.
I put the logo lights on the rear doors now and the led panel ones on the front doors. Though putting them on the rear doors makes them a bit off shaped cause of the angle.
.
I put the logo lights on the rear doors now and the led panel ones on the front doors. Though putting them on the rear doors makes them a bit off shaped cause of the angle.
#29
Former Sponsor
Installed...
Wow - And I thought my Exhaust Vents were easy! That was a cinch! The only thing you need to do is hold the shadow light down there to know which end on the original light to pry from. You can work a fingernail up under there, then gently insert a thin straight screwdriver and very gently pry it out. Then the same screwdriver to push on the connectors clip's lock, give the screwdriver a slight twist while pushing on the connector's clip lock and it will either pop the connector out or start to pop it out.
Anyway, they look bright / brilliant. Even better than I expected. I haven't driven it yet but nothing seemed loose upon install. Will report back in a couple days about rattles.
Anyway, they look bright / brilliant. Even better than I expected. I haven't driven it yet but nothing seemed loose upon install. Will report back in a couple days about rattles.