tlk2megoos

So my awesome SO decides to surprise me with new wheels for my LS, problem is she doesn't know too much about wheels but the ones she picked out were nice. wheels are 20x9 et38 front and 20x10.5 et27 rear, also both are 114.3. I appreciate what she went through to pick these up and wrap some meats on them, but are these even workable with adapters given the crazy offsets?

RayLS

Rear offset is a little low unless you don't mind the rear poking out. Front offset is okay.
LS - 5 x 120, not 114.3

tlk2megoos

Thanks. I was curious because if I wanted to even try to run these, they'd need adapters which would change the offset even more.

younglad

The rears will poke out big time

AznRacer

iTrader: (2)

If you like them and afraid of rubbing using the adapters just get a shop to redrill them to 5x120

rominl

iTrader: (4)

you should worry about the bolt pattern. you are correct, with adapters the wheels will stick out big time. as is the rears are quite aggressive already

qtrung909

Depending on the wheels, they could be redrilled to 5x120

Dr. Jekyll

iTrader: (1)

My opinion is I'd just return them and start over. Seems like a ton of trouble only to end up with wheels that won't fit that well after all is said and done.

tlk2megoos

Sent off to be redrilled and sleeved. Had lots of feedback on reliable places and learned this was an easy switch to redrill. Will be just like the image below when all is said and done: